Hi all. Two days ago I recieved my FoxBoard LX. The first tests faild, nothing worked. Only the green LED was on all the time with no network activity. Well, trying to flash the board causes errors. I tried two network cards, a few power supplies, but nothing helped.
a "./boot_linux -F" gives the message: [EMAIL PROTECTED] devboard-R2_01]# ./boot_linux -F Prepending "/home/gazoox/fox/devboard-R2_01/tools/build/bin" to PATH. Prepending "/usr/local/cris/bin" to PATH. Using internal boot loader: INTERNAL_NW - Network boot (default). Starting boot... We're doing a flash write, this may take up to a few minutes... Device ID = 0x00006137 This bootloader was built by gazoox on Fr 2. Feb 01:54:20 CET 2007. Checksum of bootloader is 0x000a0a8c Waiting for load info. Checksum of file is 0x00001e3d Got load info. SET_REGISTER 0xb0000000 0x000095f8 SET_REGISTER 0xb0000004 0x00000004 SET_REGISTER 0xb000000c 0x09603636 SET_REGISTER 0xb0000008 0x8000c002 PAUSE_LOOP 0x00020000 SET_REGISTER 0xb0000008 0x8000c602 SET_REGISTER 0xb0000008 0x8000c002 SET_REGISTER 0x38001f00 0x00000007 SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8000c402 SET_REGISTER 0xb0000008 0x8000c002 LOOP 0x38001f00 0x38001f5c SET_REGISTER 0xb0000008 0x8030c202 SET_REGISTER 0xb0000008 0x8000c002 SET_REGISTER 0xb0000008 0x80008002 SET_REGISTER 0xb0000030 0x00001df0 SET_REGISTER 0xb0000038 0x0000ce03 PACKET_INFO 0xc0004000 0x00400018 Checksum of file is 0x299fc3b5 FLASH 0xc0004000 0x00000000 0x00400000 Found 1 x CFI at 0x80000000 No single x16 at 0x84000000 No interleaved x16 at 0x84000000 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes 0x80000000: Erasing 0x00313100 bytes Sector erase error END Exiting with code 0 ------------------------------------------- and sometimes the board tries to erase the flash: [...] Checksum of file is 0x299fc3b5 FLASH 0xc0014000 0x00010000 0x003f0000 Found 1 x CFI at 0x80000000 No single x16 at 0x84000000 No interleaved x16 at 0x84000000 Fatal: flash is too small. END Exiting with code 0 [EMAIL PROTECTED] devboard-R2_01]# ------------------------------- I'm tring to solve the problem much too many hours until now. Please help! :-< [:-/] [Non-text portions of this message have been removed]
