Hi, can you please post the files : * kernelconfig * kernelconfig-2.6 * .config
form the devboard-R2_01 folder Thanks, John Quoting gazoox22 <[EMAIL PROTECTED]>: > Hi all. > > Two days ago I recieved my FoxBoard LX. The first tests faild, nothing > worked. Only the green LED was on all the time with no network activity. > Well, trying to flash the board causes errors. I tried two network > cards, a few power supplies, but nothing helped. > > a "./boot_linux -F" gives the message: > > [EMAIL PROTECTED] devboard-R2_01]# ./boot_linux -F > Prepending "/home/gazoox/fox/devboard-R2_01/tools/build/bin" to PATH. > Prepending "/usr/local/cris/bin" to PATH. > Using internal boot loader: INTERNAL_NW - Network boot (default). > Starting boot... > We're doing a flash write, this may take up to a few minutes... > > > Device ID = 0x00006137 > This bootloader was built by gazoox on Fr 2. Feb 01:54:20 CET 2007. > Checksum of bootloader is 0x000a0a8c > Waiting for load info. > Checksum of file is 0x00001e3d > Got load info. > SET_REGISTER > 0xb0000000 > 0x000095f8 > SET_REGISTER > 0xb0000004 > 0x00000004 > SET_REGISTER > 0xb000000c > 0x09603636 > SET_REGISTER > 0xb0000008 > 0x8000c002 > PAUSE_LOOP > 0x00020000 > SET_REGISTER > 0xb0000008 > 0x8000c602 > SET_REGISTER > 0xb0000008 > 0x8000c002 > SET_REGISTER > 0x38001f00 > 0x00000007 > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8000c402 > SET_REGISTER > 0xb0000008 > 0x8000c002 > LOOP > 0x38001f00 > 0x38001f5c > SET_REGISTER > 0xb0000008 > 0x8030c202 > SET_REGISTER > 0xb0000008 > 0x8000c002 > SET_REGISTER > 0xb0000008 > 0x80008002 > SET_REGISTER > 0xb0000030 > 0x00001df0 > SET_REGISTER > 0xb0000038 > 0x0000ce03 > PACKET_INFO > 0xc0004000 > 0x00400018 > Checksum of file is 0x299fc3b5 > FLASH > 0xc0004000 > 0x00000000 > 0x00400000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > 0x80000000: Erasing 0x00313100 bytes > Sector erase error > END > Exiting with code 0 > > ------------------------------------------- > > and sometimes the board tries to erase the flash: > > [...] > Checksum of file is 0x299fc3b5 > FLASH > 0xc0014000 > 0x00010000 > 0x003f0000 > Found 1 x CFI at 0x80000000 > No single x16 at 0x84000000 > No interleaved x16 at 0x84000000 > Fatal: flash is too small. > END > Exiting with code 0 > [EMAIL PROTECTED] devboard-R2_01]# > > ------------------------------- > > I'm tring to solve the problem much too many hours until now. Please > help! :-< [:-/] > > > > > [Non-text portions of this message have been removed] > >
