Ok, I can connect : J7.1 and J7.13 to J13 and excute this command :
setbits -p g -b 25 -s 1 to make a hard reset without risk ? Raph --- In [email protected], Roberto Asquini <[EMAIL PROTECTED]> wrote: > > Dear Raph, > > to restart the Fox Board you can take two approaches: software reboot or > hardware restart. > > On the software side you can just put the command "reboot" ina script > and instruct the Operating system to start that script every day with cron. > > On the hardware side the more reliable way to restart the Fox Board is > NOT by means of the reset jumper J9. > The best way is to use the shutdown jumper J13 since the hardware reset > is not 100% reliable (see Axis ETRAXLX100 known issues in their website). > The Shutdown function has been added in the project for this purpose, to > put the whole +3.3V load onboard Fox in sleep since it acts on the +3.3V > power regulator. > > Best regards, > > Roberto Asquini > > mc83000 ha scritto: > > > > Hi, > > > > I need to restart electrically my foxboard, when it crash or every day > > > > Have you a solution for me ? > > > > Thanks > > > > Raph > > > > > > > -- > Roberto Asquini > Acme Systems srl > [EMAIL PROTECTED] > http://www.acmesystems.it >
