Message text written by "Foxboro DCS Mail List"
>If you are referring to Foxboro's standard color scheme on detail displays,
it means "out of range". You will see it if your BADOPT is set to something
other than 3, which is the default, and means "go IOBAD if the signal is
High out of range OR Low Out-of range". <
Tim,
Thanks for your information about the highlighting. We must have a
different problem because our BADOPT is set to 3 and we still have the
green. This is on an ESSCOR simulator which has a virtual CP not a real
CP. The block is an MDACT block which is sort or an oddball anyway. The
block seems to work OK and everything is within limits so I think I will
just ignore it for now. Thanks again.
Cyrus
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
