Got it working. Thanks to all for your help.
Chad Airhart
Instrument, Electrical & Control Systems Engineer
Equistar Chemicals, LP.
Victoria, TX
Wk. (361) 572-2568
Pgr. (361) 270-2214 alpha messaging at www.arch.com
Fx. (361) 572-2541
> -----Original Message-----
> From: Jeremy Milum [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, November 17, 2000 10:37 AM
> To: Foxboro DCS Mail List
> Subject: RE: [Digest] Email from AW51B to MS Exchange
>
>
> > My question is is there any way to get the AW to
> > recognize changes to the hosts file without a reboot?
>
> You shouldn't need a reboot for changes in the hosts file to take effect.
> Certain process might need to be restarted to read their appropriate
> configuration files, this can be done by sending them a HUP signal.
> If you edit the inetd.conf file you need to send inetd a HUP for it to
> re-read the file. Use 'ps -eaf | grep inetd' to get the process id
> and then 'kill -HUP [process id]' to restart it. Perhaps you just need
> to restart sendmail in the same way, but this should only be necessary
> if you modified its config file, not just for a hosts file change.
>
> --
> Jeremy Milum
> 7114 North Lamar Blvd.
> Austin, TX 78752
> Phone: 512-483-0928
> Fax: 512-302-6904
> Email: [EMAIL PROTECTED]
>
>
>
> -----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro Company. All
> postings from this list are the work of list subscribers and no warranty
> is made or implied as to the accuracy of any information disseminated
> through this medium. By subscribing to this list you agree to hold the
> list sponsor(s) blameless for any and all mishaps which might occur due to
>
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
