What do you see when you run 'ifconfig -a'? Here's the response from one of
my D-style boxes:
21AW01-dmdo> ifconfig -a
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
hme0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 151.128.21.65 netmask ffff0000 broadcast 151.128.255.255
hme1: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 151.163.74.51 netmask fffff800 broadcast 151.163.79.255
Hope this helps.
Duc
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 9:38 AM
To: [EMAIL PROTECTED]
Subject: Ethernet port
Hi everyone,
I have a problem on the second ethernet port of an AW51, coneccted to the
corporate network. Suddenly it ceased to recognize the network as if we
diconeccted the cable (if you try a ping from the network it would not
answer).
No need to say that we already checked that we have network signal at that
port.
Is there any way to force the AW to rescan/reset this port without rebooting
it?
Thank you all in advance.
Mart�n Ugarte
CAS - Refiner�a La Plata
Repsol-YPF - Argentina
_____________________________________________________________________
This message has been checked for all known viruses by the
MessageLabs Virus Scanning Service. For further information visit
http://www.messagelabs.com/stats.asp
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
