You can bring an interface down and up with the following commands:
ifconfig hme1 down
ifconfig hme1 up
Wim Verberckt
Bayer Antwerpen
Belgium
[EMAIL PROTECTED]
Sent by: To:
[EMAIL PROTECTED]
<[EMAIL PROTECTED] cc:
oject.org> Subject: Ethernet port
27-08-2001 16:08
Please respond to "Foxboro
DCS Mail List"
Hi everyone,
I have a problem on the second ethernet port of an AW51, coneccted to the
corporate network. Suddenly it ceased to recognize the network as if we
diconeccted the cable (if you try a ping from the network it would not answer).
No need to say that we already checked that we have network signal at that port.
Is there any way to force the AW to rescan/reset this port without rebooting it?
Thank you all in advance.
Mart�n Ugarte
CAS - Refiner�a La Plata
Repsol-YPF - Argentina
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings
from this list are the work of list subscribers and no warranty is made or
implied as to the accuracy of any information disseminated through this medium.
By subscribing to this list you agree to hold the list sponsor(s) blameless for
any and all mishaps which might occur due to your application of information
received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
