Here is the complete information:
There are 2 QFs. One for the "le driver" and 1 for the "hme driver".
The le QF is appiled to 51A, 51B and 51C type stations.
The hme QF is applied to 51D and 51E type stations.
So, the table is:
Device Station Types QF
le 51a/b/c QF990944C
hme 51d/e QF992053B
I would make sure that anyone who is connected to a corporate network
install the correct QF for their machine. Check with your FS personnel for
more information.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
-----Original Message-----
From: Johnson, Alex (Foxboro) [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 9:20 AM
To: Foxboro DCS Mail List
Subject: RE: Ethernet port
I'm pretty sure that it has been revised to 'C'.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
-----Original Message-----
From: John Metsker [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 9:05 AM
To: 'Foxboro DCS Mail List'
Subject: RE: Ethernet port
The Quick Fix to improve hme driver functionality is
QF992053B. It
is recommended for use when connecting to a corporate utilizing
switches.
-----Original Message-----
From: Johnson, Alex (Foxboro) [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ]
Sent: Monday, August 27, 2001 8:56 AM
To: Foxboro DCS Mail List
Subject: RE: Ethernet port
The ifconfig command can be used to reconfigure the port.
There is an update to the Ethernet driver to fix a number of
defects. You
need to contact the Customer Satisfaction Center and ask
about a QF
for the
Ethernet Driver on 50 Series AWs. I don't remember the QF
number.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] < mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> >
-----Original Message-----
From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 8:38 AM
To: [EMAIL PROTECTED]
Subject: Ethernet port
Hi everyone,
I have a problem on the second ethernet port of an
AW51,
coneccted
to the
corporate network. Suddenly it ceased to recognize
the
network as if
we
diconeccted the cable (if you try a ping from the
network it
would
not answer).
No need to say that we already checked that we have
network
signal
at that port.
Is there any way to force the AW to rescan/reset
this port
without
rebooting it?
Thank you all in advance.
Mart�n Ugarte
CAS - Refiner�a La Plata
Repsol-YPF - Argentina
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the
Foxboro
Company.
All postings from this list are the work of list subscribers
and no
warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree
to hold
the list
sponsor(s) blameless for any and all mishaps which might
occur due
to your
application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send
any mail
to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro
Company.
All postings from this list are the work of list subscribers and no
warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree to hold
the list
sponsor(s) blameless for any and all mishaps which might occur due
to your
application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail
to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company.
All postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the list
sponsor(s) blameless for any and all mishaps which might occur due to your
application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
