I've been using simpleget to control ethernet relays like this:
S:=TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/15');But if the IP address does not exist on the network I get this error: An unhandled exception occurred at $0000000100032A4A: ESocketError: Connection to 10.10.01.01:80 timed out. And my program terminates. Is there some way I can capture this error with my program so I can just put up a message about the problem and keep running? Is there a way to change the amount of time before the timeout? James -----Original Message----- From: fpc-pascal <[email protected]> On Behalf Of James Richters Sent: Monday, May 25, 2020 8:19 AM To: 'FPC-Pascal users discussions' <[email protected]> Subject: Re: [fpc-pascal] Ethernet Relays Thank you Michael, I would have really overcomplicated that, glad I asked James -----Original Message----- From: fpc-pascal <[email protected]> On Behalf Of Michael Van Canneyt Sent: Monday, May 25, 2020 6:54 AM To: [email protected]; FPC-Pascal users discussions <[email protected]> Subject: Re: [fpc-pascal] Ethernet Relays On Mon, 25 May 2020, James Richters wrote: > Thanks! > > Is there some convenient way to get the HTML into a Tstringlist? Yes. Simpleget is overloaded to accept a tstrings: L:=TstringList.Create; try TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/01',L); finally L.Free; end; Michael. > > James > > -----Original Message----- > From: fpc-pascal <[email protected]> On Behalf > Of Michael Van Canneyt > Sent: Monday, May 25, 2020 4:47 AM > To: [email protected]; FPC-Pascal users discussions > <[email protected]> > Cc: 'Ched' <[email protected]> > Subject: Re: [fpc-pascal] Ethernet Relays > > > > On Sun, 24 May 2020, James Richters wrote: > >> I got this working, thanks for the advice Ched, >> >> Here's my test program: >> uses fphttpclient; >> Begin >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/01'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/03'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/05'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/07'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/43'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/09'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/11'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/13'); >> TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/15'); >> End. >> >> I have to give it a command to go the next page for some reason or >> relays >> 5-8 won't work... so now I'm wondering if there is a way I can >> retrieve the data that is normally displayed in my browser to I can >> see what page number I'm on, I could also then check the status of >> the relays as well by analyzing what I read. > > Simpleget is a function that returns the page: > > S:=TFPHTTPCLIENT.SIMPLEGET('http://10.10.01.01/30000/15'); > > S will contain the page of HTML. > > If you need to send a command, you'll probably need to use > SimplePost() > > Michael. > _______________________________________________ > fpc-pascal maillist - [email protected] > https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal > _______________________________________________ > fpc-pascal maillist - [email protected] > https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal _______________________________________________ fpc-pascal maillist - [email protected] https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal _______________________________________________ fpc-pascal maillist - [email protected] https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal _______________________________________________ fpc-pascal maillist - [email protected] https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
