Hi, thank for your support.
I'll try using SniffUSB this evening. Regards, Typhoe 2007/11/26, Daniel Drake <[EMAIL PROTECTED]>: > > Typhoe wrote: > > Hi, > > > > I've got no success using the binary from Upek. > > > > So I installed a Windows XP (And that was a real pain in the ass..., so > > the delay to reply to you :( ). > > > > I used UsbTrace (from sysNucleus) to trace the exchange using the > > FingerReader. > > That data format is quite inconvenient to work from. Any chance you can > do the same using this one instead: > http://www.pcausa.com/Utilities/UsbSnoop/default.htm > > Please capture two sessions, and try and make each session quite short - > i.e. only scan your finger once. Also try and insert a 3-5 second gap > between each point: e.g. start logging, wait 3 secs, open the scanning > app, wait 3 secs, scan finger, wait 3 secs, etc. > > Also, it may not be practical to write a driver based on the windows > one. The windows driver for my UPEK device scrambles the data (I can't > tell if yours does without seeing a second session). > > It is unlikely that the UPEK linux driver does scrambling for your > device -- at least it does not do it for the currently supported > devices. It would be worthwhile putting more effort into getting that > working. If you get stuck, ask on the mailing list, maybe someone can > help. > > Thanks, > Daniel > >
_______________________________________________ fprint mailing list fprint@reactivated.net http://lists.reactivated.net/mailman/listinfo/fprint