I thought so too. I'm sure that is what I did. -- Scott White Media Production Manager AlaMark Technologies 210-704-8239 swhite at alamark.com
> From: Rick Quatro <frameexpert at truevine.net> > Date: Mon, 27 Feb 2006 17:06:22 -0500 > To: Scott White <swhite at alamark.com>, Framers <framers at FrameUsers.com> > Subject: Re: Setting page size to show bleeds > > Hi Scott, > > I think you have to set the PDF page size and registration marks in the PDF > Setup dialog box. Format > Document > PDF Setup. > > Rick Quatro > Carmen Publishing > 585-659-8267 > www.frameexpert.com > > >> Folks >> I was at a client's site last week and training the clients on our >> software >> and framemaker on the PC. >> When it came to distilling the files and creating pdfs that show bleeds I >> could not get the pages to cooperate. I went in and changed the print >> output >> from letter size to tabloid and I also changed my distiller page size to >> tabloid. I selected show crop marks. >> After creating the postscript file and then opening that file in distiller >> the pdf page format was still letter size which of course showed no bleeds >> nor crops marks. >> I use a MAC here and these steps are how I create my printer pdfs on the >> Mac. I then can show both the bleed tabs and crop marks. I have not done >> much outputting with a pc version of Frame. IS there something I missed? >> Client was using Frame 7.1, distiller 7.0. >> I use frame 7.0 distiller 5.0. >> -- >> Scott White >> Media Production Manager >> AlaMark Technologies >> 210-704-8239 >> swhite at alamark.com >
