Amanda,
These diagrams are very helpful, thank you!
Matt
On Thursday, August 15th, 2024 at 7:25 PM, Amanda Thomson
<[email protected]> wrote:
> Hi Matt,
>
> It's true what everyone says, loading a lomo tank takes lots of practice to
> get comfortable with. If you haven't done it before start in daylight with
> dummy film..
>
> I was having quite a bit of trouble last year, despite years of practice and
> discovered I was using the wrong combination of spacers. What I was doing had
> always worked on previous tanks, but not on the one I bought on ebay. Someone
> here linked to this doc with might have the diagram you're looking for
> (https://sites.google.com/site/olexserviceskinor/processing-of-a-cine-film-in-home-laboratory/spiral-processing-tanks?authuser=0),
> which helped me to realize that I was used to doing "1 16mm version II", but
> for whatever reason I needed to be doing "1 16 version I".
>
> And I don't have a spare turntable laying around, but I've found a push pin
> in the middle of a piece of plywood works well. The plywood doesn't turn, but
> the head of the pin helps keep the spiral in the same spot while spinning the
> spiral.
>
> Hopefully this helps and good luck!
>
> Amanda Thomson--
>
> she/her
> unceded = stolen
>
> [Saxe Point @
> doing.and.doing](https://www.doinganddoing.com/artworks?pgid=kdflk42d-bf472e67-2867-4ce9-8bc1-800f4226afac)
>
> https://vimeo.com/amandathttp://www.irisfilmcollective.com
>
>> ---------- Forwarded message ----------
>> From: Matt Shaw <[email protected]>
>> To: Experimental Film Discussion List <[email protected]>
>> Cc:
>> Bcc:
>> Date: Thu, 15 Aug 2024 12:28:35 +0000
>> Subject: [Frameworks] lomo tank instructions
>>
>> Hi Folks,
>>
>> I'm looking for instructions on loading a 50' Lomo tank with 16mm film. I
>> believe I have all the correct spacers for the tank. I hear there's a manual
>> somewhere online, in Russian but highly illustrated.
>>
>> I can get the film threaded but am having difficulty spooling film onto the
>> tank's spiral reels. Every YouTube video makes this look incredibly easy but
>> I keep bending the film and jumping the track/groove.
>>
>> looking to hand process with a cleaner image — Matt
--
Frameworks mailing list
[email protected]
https://mail.film-gallery.org/mailman/listinfo/frameworks_film-gallery.org
