Hi folks, I was wondering if anyone on this list has some times for processing kodak colour negative 16mm film in a Morse G3 tank using Jobo C-41 Press Kit? This is what I have been doing and find the contrast to be lower then I had expected. I process 100' rolls. First run through PB-2 Formula to remove Remjet - 4 minutes: equaling 4 passes - temp- 38 CelsiusRinse with water 5 minutes: equaling 6 passes using fresh water per pass - temp- 38 CelsiusDeveloper: 7 minutes equaling 7 passes - temp- 38 Celsius2nd Rinse: 6 minutes equaling 8 passes using fresh water per pass - temp- 38 CelsiusBlix: 12 minutes equaling 12 passes - temp- 38 CelsiusFinal Rinse: 16 minutes over 16 passes using fresh water per pass - temp- 38 CelsiusStabilizer: 4 minutes equaling 4 passes - room temperatureHang film to dry: Thanks folks!
Roger D. WilsonFilm Scientist613 324 - [email protected]http://www.rogerdwilson.ca Without failure you can never achieve success. I have based my process and my career as an experimental film artist on this statement; and I welcome it as it pushes me forward as an artist to try something different, something new.
_______________________________________________ FrameWorks mailing list [email protected] https://mailman-mail5.webfaction.com/listinfo/frameworks
