replace procession with precision On Jul 26, 2016, at 1:40 PM, George, Sherman <[email protected]<mailto:[email protected]>> wrote:
If the gate does not have pitting from rust you can try red Jeweler’s Rouge on a soft cotton cloth. This will polish without scratching. Start with a damp cloth and follow with a dry cloth. Also 3M makes Scotch-brite and the white is the finest grade and will remove surface rust without scratching the metal. When removing rust from procession surfaces test in a non-critical area first. Hope this helps Sherman On Jul 26, 2016, at 6:31 AM, peter humble <[email protected]<mailto:[email protected]>> wrote: Hi everybody, I've recently acquired a small 16mm contact printer. It seems to be working fine but is a bit rusty in parts. I plan to strip it back and give it a good clean. Just wondering if there's anyone on the list who has had experience in cleaning/maintaining such machines? What materials should/shouldn't I use when cleaning rust from gates etc and other parts? Regards, Peter Humble | Research Affiliate | Screen Arts Sydney College of the Arts _______________________________________________ FrameWorks mailing list [email protected]<mailto:[email protected]> https://mailman-mail5.webfaction.com/listinfo/frameworks Sherman George [email protected]<mailto:[email protected]> 858-229-4368 _______________________________________________ FrameWorks mailing list [email protected]<mailto:[email protected]> https://mailman-mail5.webfaction.com/listinfo/frameworks Sherman George [email protected]<mailto:[email protected]> 858-229-4368
_______________________________________________ FrameWorks mailing list [email protected] https://mailman-mail5.webfaction.com/listinfo/frameworks
