Thanks Scott and George, There is a bit of rust in the gate so I will be very careful. Scott, what is '409"? I'm not familiar with it. Regards,Peter Humble | Research Affiliate | Screen Arts Sydney College of the Arts
From: "frameworks-requ...@jonasmekasfilms.com" <frameworks-requ...@jonasmekasfilms.com> To: frameworks@jonasmekasfilms.com Sent: Wednesday, 27 July 2016, 22:00 Subject: FrameWorks Digest, Vol 74, Issue 23 ----- Forwarded Message ----- Send FrameWorks mailing list submissions to frameworks@jonasmekasfilms.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman-mail5.webfaction.com/listinfo/frameworks or, via email, send a message with subject or body 'help' to frameworks-requ...@jonasmekasfilms.com You can reach the person managing the list at frameworks-ow...@jonasmekasfilms.com When replying, please edit your Subject line so it is more specific than "Re: Contents of FrameWorks digest..." Today's Topics: 1. Advice cleaning up a salvaged 16mm Contact Printer (peter humble) 2. The Ann Arbor Film Festival (Mark Toscano) 3. Re: Advice cleaning up a salvaged 16mm Contact Printer (Scott Dorsey) 4. Re: Advice cleaning up a salvaged 16mm Contact Printer (George, Sherman) 5. Re: Advice cleaning up a salvaged 16mm Contact Printer (George, Sherman) 6. Re: Advice cleaning up a salvaged 16mm Contact Printer (Scott Dorsey) Hi everybody, I've recently acquired a small 16mm contact printer. It seems to be working fine but is a bit rusty in parts. I plan to strip it back and give it a good clean. Just wondering if there's anyone on the list who has had experience in cleaning/maintaining such machines? What materials should/shouldn't I use when cleaning rust from gates etc and other parts? Regards,Peter Humble | Research Affiliate | Screen Arts Sydney College of the Arts Hi everyone, Some of you may not be aware that David Dinnell, in my opinion one of the truly great film curators we have in the world today, was unceremoniously and abruptly dismissed by the Ann Arbor Film Festival a few months ago. Aside from the thoughtless and callous nature of this act, it's just an infuriating and baffling decision which has, for me and many others, tossed everything that made the Ann Arbor Film Festival great over the past several years into the trash. I'm far from the only person who feels that under David's tenure as program director, Ann Arbor extremely quickly became one of the most interesting global showcases for independent/experimental media art. This was in giant part due to David's far-reaching, creative, and thoughtful programming, as well as the sense of community that this outreach was able to foment at Ann Arbor for the festival every year. Obviously there were many other Ann Arbor community members and the very dedicated staff that made this happen along with David, but David's curatorial vision gave so many people a big reason to be excited every March to attend, to see an excellent and inspiring program of work of all kinds, and also to participate in the community that would assemble there. For my part, I can't express how disappointed I am that this will no longer be the case and how pissed I am that the festival's director and board so unconscionably and stupidly dismissed David. I will not be collaborating with the festival in any way moving forward. If you're someone who enjoyed Ann Arbor in the past several years in person or from afar, via the festival itself, its touring programs, its DVD compilations, or just in the pleasure of its extensive program guides, please read and consider signing this petition to express a community's displeasure with this recent and highly problematic turn of events. http://www.ipetitions.com/petition/letter-to-the-board-of-the-ann-arbor-film-festival thanks for your patience with my rant - Mark Toscano409 is your friend, as long as you keep it away from bakelite and other phenolics. Rust is a problem. Where is the rust? Is it on the gate or just on stuff that doesn't touch the film? A rust stabilizer might be fine if you don't want to polish it all out, on noncritical parts that aren't touching the film. The gate is a pain though, since it's fairly high precision to keep everything sandwiched together without scratching (and if it's one of those TV station newsroom printers it's likely not so precise in the first place so you need all you can get). --scott If the gate does not have pitting from rust you can try red Jeweler’s Rouge on a soft cotton cloth. This will polish without scratching. Start with a damp cloth and follow with a dry cloth.Also 3M makes Scotch-brite and the white is the finest grade and will remove surface rust without scratching the metal. When removing rust from procession surfaces test in a non-critical area first.Hope this helpsSherman On Jul 26, 2016, at 6:31 AM, peter humble <petehum...@yahoo.com> wrote: Hi everybody, I've recently acquired a small 16mm contact printer. It seems to be working fine but is a bit rusty in parts. I plan to strip it back and give it a good clean. Just wondering if there's anyone on the list who has had experience in cleaning/maintaining such machines? What materials should/shouldn't I use when cleaning rust from gates etc and other parts? Regards,Peter Humble | Research Affiliate | Screen Arts Sydney College of the Arts _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks Sherman Georgesgeorge@ucsd.edu858-229-4368 replace procession with precision On Jul 26, 2016, at 1:40 PM, George, Sherman <sgeo...@ucsd.edu> wrote: If the gate does not have pitting from rust you can try red Jeweler’s Rouge on a soft cotton cloth. This will polish without scratching. Start with a damp cloth and follow with a dry cloth.Also 3M makes Scotch-brite and the white is the finest grade and will remove surface rust without scratching the metal. When removing rust from procession surfaces test in a non-critical area first.Hope this helpsSherman On Jul 26, 2016, at 6:31 AM, peter humble <petehum...@yahoo.com> wrote: Hi everybody, I've recently acquired a small 16mm contact printer. It seems to be working fine but is a bit rusty in parts. I plan to strip it back and give it a good clean. Just wondering if there's anyone on the list who has had experience in cleaning/maintaining such machines? What materials should/shouldn't I use when cleaning rust from gates etc and other parts? Regards,Peter Humble | Research Affiliate | Screen Arts Sydney College of the Arts _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks Sherman Georgesgeorge@ucsd.edu858-229-4368 _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks Sherman Georgesgeorge@ucsd.edu858-229-4368 Yes. Watch out for Scotch-Brite pads, though, they can leave behind tiny abrasive crystals, so you need to clean up very carefully after using them. (That goes for rouge as well, but people expect that, whereas they often don't expect it with Scotch-Brite.) --scott _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks