On 3/10/2014 4:03 PM, Larry Baird wrote:
10.0-STABLE FreeBSD 10.0-STABLE #2 r262153 i386
You will need to either update the BIOS or patch FreeBSD 10. The
patch associated with:
http://svnweb.freebsd.org/base?view=revision&sortby=date&revision=261243
applies cleanly to FreeBSD 10. The latest BIOS from PC engines for the APU
board is very noisy when it boots. Hopefully the code change will get MFCed
now that the APU board is generally available:
http://www.pcengines.ch/apu.htm
With the patch, all seems to work well so far. I updated to RELENG10
r262980M i386. I can now attach the watchdog, and it indeed works!
Full dmesg of the pcengines APU attached for the archives.
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [email protected]
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
FreeBSD alix_2gen.sentex.ca 10.0-STABLE FreeBSD 10.0-STABLE #1 r262980M: Mon
Mar 10 16:54:07 EDT 2014
[email protected]:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC
i386
root@alix_2gen:/usr/home/mdtancsa # cat /var/run/dmesg.boot
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-STABLE #1 r262980M: Mon Mar 10 16:54:07 EDT 2014
[email protected]:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC
i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping
= 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 2114297856 (2016 MB)
avail memory = 2052513792 (1957 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd0 at kbdmux0
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xc0f1f940, 0) error 19
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x1000-0x10ff mem 0xfe600000-0xfe600fff,0xfe500000-0xfe503fff at device 0.0 on
pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
re0: Ethernet address: 00:0d:b9:33:11:c4
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x2000-0x20ff mem 0xfe800000-0xfe800fff,0xfe700000-0xfe703fff at device 0.0 on
pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
re1: Ethernet address: 00:0d:b9:33:11:c5
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x3000-0x30ff mem 0xfea00000-0xfea00fff,0xfe900000-0xfe903fff at device 0.0 on
pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
re2: Ethernet address: 00:0d:b9:33:11:c6
ahci0: <ATI IXP700 AHCI SATA controller> port
0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f mem
0xfeb04000-0xfeb043ff at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb00000-0xfeb00fff at
device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04400-0xfeb044ff at
device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb01000-0xfeb01fff at
device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04500-0xfeb045ff at
device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4010-0x401f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: failed to allocate initial memory window: 0-0xfffff
pcib4: failed to allocate initial prefetch window: 0-0xfffff
pci0: couldn't attach pci bus
device_attach: pcib4 attach returned 6
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb02000-0xfeb02fff at
device 20.5 on pci0
usbus4 on ohci2
pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb03000-0xfeb03fff at
device 22.0 on pci0
usbus5 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04600-0xfeb046ff at
device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
acpi_button0: <Power Button> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub4: 2 ports with 2 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen6.2: <Generic> at usbus6
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on
usbus6
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0:-1: Attached to scbus6
ugen0.2: <APC> at usbus0
ugen0.3: <Conexant> at usbus0
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
Netvsc initializing... SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1000021163 Hz quality 800
Trying to mount root from nfs: []...
NFS ROOT: 10.255.255.1:/home/pxe10
umodem0: <Conexant USB Modem, class 2/0, rev 1.10/1.00, addr 3> on usbus0
umodem0: data interface 1, has CM over data, has no break
amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem
0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
root@alix_2gen:/usr/home/mdtancsa # usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen3.1: <EHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen5.1: <OHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen6.1: <EHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen6.2: <Flash Card ReaderWriter Generic> at usbus6, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (100mA)
ugen0.2: <Back-UPS ES 550 FW843.K2 .D USB FWK2 APC> at usbus0, cfg=0 md=HOST
spd=LOW (1.5Mbps) pwr=ON (2mA)
ugen0.3: <USB Modem Conexant> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
(100mA)
root@alix_2gen:/usr/home/mdtancsa # usbconfig
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen1.1: <EHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen3.1: <EHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen5.1: <OHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE (0mA)
ugen6.1: <EHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen6.2: <Flash Card ReaderWriter Generic> at usbus6, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (100mA)
ugen0.2: <Back-UPS ES 550 FW843.K2 .D USB FWK2 APC> at usbus0, cfg=0 md=HOST
spd=LOW (1.5Mbps) pwr=ON (2mA)
ugen0.3: <USB Modem Conexant> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
(100mA)
# pciconf -lvbc
hostb0@pci0:0:0:0: class=0x060000 card=0x15101022 chip=0x15101022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Complex'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib2@pci0:0:5:0: class=0x060400 card=0x12341022 chip=0x15131022 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib3@pci0:0:6:0: class=0x060400 card=0x12341022 chip=0x15141022 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port slot max data 128(128) link x1(x1)
speed 2.5(5.0) ASPM L0s/L1(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ahci0@pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002 rev=0x40
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0x4020, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x4040, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x4028, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x4044, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 16, enabled
bar [24] = type Memory, range 32, base 0xfeb04000, size 1024, enabled
cap 12[70] = SATA Index-Data Pair
cap 13[a4] = PCI Advanced Features: FLR TP
ohci0@pci0:0:18:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb00000, size 4096, enabled
ehci0@pci0:0:18:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04400, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
ohci1@pci0:0:19:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb01000, size 4096, enabled
ehci1@pci0:0:19:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04500, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0: class=0x0c0500 card=0x15101022 chip=0x43851002 rev=0x42
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
atapci0@pci0:0:20:1: class=0x01018a card=0x439c1002 chip=0x439c1002 rev=0x40
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 IDE Controller'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0x4010, size 16, enabled
isab0@pci0:0:20:3: class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 LPC host controller'
class = bridge
subclass = PCI-ISA
none1@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40
hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
ohci2@pci0:0:20:5: class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb02000, size 4096, enabled
pcib4@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00
hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x4)
speed undef(2.5) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ohci3@pci0:0:22:0: class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb03000, size 4096, enabled
ehci2@pci0:0:22:2: class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb04600, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 0'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 1'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 2'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 3'
class = bridge
subclass = HOST-PCI
cap 0f[f0] = unknown
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 4'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 6'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 5'
class = bridge
subclass = HOST-PCI
hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 7'
class = bridge
subclass = HOST-PCI
re0@pci0:1:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x1000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfe600000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe500000, size
16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
re1@pci0:2:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x2000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfe800000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe700000, size
16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
re2@pci0:3:0:0: class=0x020000 card=0x012310ec chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0x3000, size 256, enabled
bar [18] = type Memory, range 64, base 0xfea00000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xfe900000, size
16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1(x1)
speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
To unsubscribe, send any mail to "[email protected]"
