I have one box which is slow to boot under -current (mind you, I've never
run anything but -current on this box). There are two pauses. One after
ata0 appears and another after ata-isa0 appears.
All times are approximate (I had to count, no watches to hand).
This is written on the motherboard: P/I-P55TP4XE.
tia folks.
$ uname -a
FreeBSD buff.unixathome.org 4.0-CURRENT FreeBSD 4.0-CURRENT
#0: Sun Feb 6 18:05:58 NZDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/BUFF i386
[dan@buff:/usr/home/dan] $ dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sun Feb 6 18:05:58 NZDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/BUFF
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (99.47-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
config> di psm0
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 28835840 (28160K bytes)
Preloaded elf kernel "kernel" at 0xc03b9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03b909c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX ATA controller> port 0xe800-0xe80f at device 7.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
[insert approx 30s pause here]
dc0: <Macronix 98715/98715A 10/100BaseTX> port 0xe400-0xe4ff mem
0xfbfa0000-0xfbfa00ff irq 11 at device 9.0 on pci0
dc0: Ethernet address: 00:80:ad:7f:4e:7b
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga-pci0: <ATI Mach64-CT graphics accelerator> mem 0xfa000000-0xfaffffff
at device 12.0 on pci0
fe0: not probed (disabled)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata-isa0: already registered as ata0
[insert approx 37s pause here]
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic1: not probed (disabled)
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
IPsec: Initialized Security Association Processing.
ad0: 1222MB <QUANTUM FIREBALL1280A> [2484/16/63] at ata0-master
using WDMA2
Mounting root from ufs:/dev/ad0s1a
--
Dan Langille - DVL Software Limited [I'm looking for more work]
The FreeBSD Diary - http://www.freebsddiary.org/
NZ FreeBSD User Group - http://www.nzfug.nz.freebsd.org/
The Racing System - http://www.racingsystem.com/
unix @ home - http://www.unixathome.org/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
