Soren Schmidt [[EMAIL PROTECTED]] wrote:
> It seems Dan Langille wrote:
> > I have one box which is slow to boot under -current (mind you, I've never
<...>
> BUT if the second channel is enabled in the BIOS and the hardware plays
> foul on probe, it will be probed for devices for the std timeout which
> is 31s pr device, give or take...
>
> -Søren
Is there any way to tell the driver not to reduce the timeout to
something less than 31s? Or would it be easier for me to just #if 0
the lun1 (iobase_2..) code in ata_pciattach()?
I'm asking because we have about 20 boxes like this. All of which are
"rack" mounted & don't have video cards, so getting at the BIOS is a
royal PITA. They are all Asus P2BLS with:
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0 at 0x01f0 irq 14 on ata-pci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=03 status0=a5 status1=a5
<..30+ seconds>
ata1: mask=00 status0=ffffffa5 status1=ffffffa5
<...>
Thanks!
------------------------------------------------------------------------------
Andrew Gallatin, Sr Systems Programmer http://www.cs.duke.edu/~gallatin
Duke University Email: [EMAIL PROTECTED]
Department of Computer Science Phone: (919) 660-6590
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
