On Sun, 24 Jan 1999, Matthew Dillon wrote:

> 
> :>     I haven't cvs updated in 24 hours, if the Acer is newly committed then 
> I'll
> :>     have to update again and retry.  The CTX is using the Acer.
> :> 
> :> ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 
> int a irq 0 on pci0.11.0
> :             ^^^^^^^^^^^^^^^^^^^^^^^^
> :
> :It's there...what symptoms are you seeing? Are you overclocking?
> :-- 
> :+--------------------------------------------------------------------+
> :| Lee Cremeans -- Manassas, VA, USA  (WakkyMouse on DALnet and WTnet)|  
> 
> 
>     No overclocking.  Stock CTX box.  Could it be the drive, maybe?
> 
>     I only get 2.4 MBytes/sec, same as before.  On my PPro box ( Intel
>     PIIX3 Bus-master IDE controller ) it went from around 2.4 MB/sec
>     to 8 MBytes/sec.
> 
>     archive:/cvs# time dd if=/dev/zero of=test2 bs=32k count=1024
>     1024+0 records in
>     1024+0 records out
>     33554432 bytes transferred in 13.700387 secs (2449159 bytes/sec)
>     0.000u 2.728s 0:13.75 19.7%     357+1405k 5+525io 1pf+0w
> 

Hmm, this is strange. I used to be able to get >3MB/s with an old chipset and
plain K6, now with
ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int a $
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <Maxtor 71626 AP>, DMA, 32-bit, multi-block-32
wd0: 1554MB (3183264 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 71626 AP>, DMA, 32-bit, multi-block-32
wd1: 1554MB (3183264 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (atapi): <LS-120 COSM   02              UHD Floppy/0271C09T>, 
removable, iordy
wfd0: medium type unknown (no disk)
wdc1: unit 1 (atapi): <NEC                 CD-ROM DRIVE:285/3.04>, removable, 
dma, iordy

This is strange, because DMA enabled on wd[01] and acd0 doesn't seem to... err
"work". I say this because I am down to ~2.5MB/s on each hard drive, a MB or
so decrease; I also seem to be reading (bs=512k) from the CD uncooked device
at the right speed (~2MB/s), but it takes up 40% of the CPU, which seems
to be just PIO. Anyone else?

> 
>                                       -Matt
>                                       Matthew Dillon 
>                                       <dil...@backplane.com>
> 
> ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int 
> a irq 0 on pci0.11.0
> wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
> wdc0: unit 0 (wd0): <QUANTUM Bigfoot TX4.0AT>, 32-bit, multi-block-16
> wd0: 3832MB (7849170 sectors), 8306 cyls, 15 heads, 63 S/T, 512 B/S
> wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
> wdc1: unit 0 (atapi): <ATAPI CDROM/V1.70>, removable, dma, iordy
> 
> 
> To Unsubscribe: send mail to majord...@freebsd.org
> with "unsubscribe freebsd-current" in the body of the message
> 

 Brian Feldman                                    _ __  ___ ___ ___  
 gr...@unixhelp.org                           _ __ ___ | _ ) __|   \ 
             http://www.freebsd.org/     _ __ ___ ____ | _ \__ \ |) |
 FreeBSD: The Power to Serve!      _ __ ___ ____ _____ |___/___/___/ 


To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message

Reply via email to