> I fixed it and other problems, and added another changes. (In
> particular, I mistakenly left my testing part in router
> case. Sorry.)
> I'll attach the new diffs.
I still made more several fixes to IPv6 configuration scripts.
-changed the file rc.net6 to rc.network6
-changed the func net6_pass1 to network6_pass1
-changed several var name more unlikely to confilict
-changed if several sentenses in rc.network6 to case sentence
like in rc.network
-wrapped many var names by {}
-and other fixes
I believe now it successfully configure each of router and
host case, very well.
Please try it anyone interested.
Thanks,
Yoshinobu Inoue
Index: defaults/rc.conf
===================================================================
RCS file: /home/ncvs/src/etc/defaults/rc.conf,v
retrieving revision 1.48
diff -u -r1.48 rc.conf
--- defaults/rc.conf 2000/02/06 19:25:00 1.48
+++ defaults/rc.conf 2000/02/18 12:53:06
@@ -184,6 +184,32 @@
### Miscellaneous network options: ###
icmp_bmcastecho="NO" # respond to broadcast ping packets
+### IPv6 options: ###
+ipv6_enable="NO" # Set to YES to set up for IPv6.
+ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
+ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
+ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
+ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
+ipv6_router_flags="" # Flags to IPv6 routing daemon.
+#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
+ # addrs.
+#ipv6_network_interfaces="ed0 ep0" # Examples for router.
+ # Choose correct prefix value.
+#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
+#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
+prefixcmd_enable="YES" # Use prefix command to assigne router prefix.
+rtadvd_enable="NO" # Set to YES to enable an IPv6 router
+ # advertisement daemon.
+mroute6d_enable="NO" # Do IPv6 multicast routing.
+mroute6d_program="/usr/sbin/pim6dd" # Name of IPv6 multicast routing
+ # daemon.
+mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
+gif_interfaces="NO" # List of GIF tunnels (or "NO").
+#gif_interfaces="gif0 gif1" # Examples typically for a router.
+ # Choose correct tunnel addrs.
+#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
+#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
+ipv6_default_interface="lo0" # Default output interface for scoped addrs.
##############################################################
### System console options #################################
Index: rc
===================================================================
RCS file: /home/ncvs/src/etc/rc,v
retrieving revision 1.210
diff -u -r1.210 rc
--- rc 2000/02/03 06:06:36 1.210
+++ rc 2000/02/18 12:53:07
@@ -191,6 +191,15 @@
network_pass1
fi
+case ${ipv6_enable} in
+[Yy][Ee][Ss])
+ if [ -r /etc/rc.network6 ]; then
+ . /etc/rc.network6 # We only need to do this once also.
+ network6_pass1
+ fi
+ ;;
+esac
+
# Mount NFS filesystems.
echo -n "Mounting NFS file systems"
mount -a -t nfs
Index: rc.network6
===================================================================
RCS file: rc.network6
diff -N rc.network6
--- /dev/null Fri Feb 18 03:29:51 2000
+++ rc.network6 Fri Feb 18 04:53:07 2000
@@ -0,0 +1,219 @@
+#! /bin/sh
+# $FreeBSD$
+
+# Note that almost all of the user-configurable behavior is no longer in
+# this file, but rather in /etc/defaults/rc.conf. Please check that file
+# first before contemplating any changes here. If you do need to change
+# this file for some reason, we would like to know about it.
+
+# IPv6 startup
+
+network6_pass1() {
+ echo -n 'Doing IPv6 network setup:'
+
+ case ${ipv6_gateway_enable} in
+ [Yy][Ee][Ss])
+ #
+ # list of interfaces, and prefix for interfaces
+ #
+ case ${ipv6_network_interfaces} in
+ [Aa][Uu][Tt][Oo])
+ ipv6_network_interfaces="`ifconfig -l`"
+ ;;
+ esac
+ ;;
+ *)
+ #
+ # manual configurations - in case ip6_gateway_enable=NO
+ # you can configure only single interface,
+ # as specification assumes that
+ # autoconfigured host has single interface only.
+ #
+ case ${ipv6_network_interfaces} in
+ [Aa][Uu][Tt][Oo])
+ ipv6_network_interfaces="`ifconfig -l \
+ | sed -e 's/ .*//'`"
+ ;;
+ esac
+ ;;
+ esac
+
+ # just to make sure
+ ifconfig lo0 up
+
+ # disallow unicast packets without outgoing scope identifiers.
+ # if you instead want to route such packets to a "default" interface,
+ # comment out the 1st two lines, and enable the lines after them.
+ case ${ipv6_default_interface} in
+ '')
+ route add -inet6 fe80:: -prefixlen 10 ::1 -reject
+ ;;
+ *)
+ laddr=`ifconfig ${ipv6_default_interface} inet6 \
+ | grep 'inet6 fe80:' | head -1 | awk '{print $2}'`
+ route add -inet6 fe80:: ${laddr} -prefixlen 10 -interface \
+ -cloning
+ route add -inet6 ff02:: ${laddr} -prefixlen 16 -interface \
+ -cloning
+ ;;
+ esac
+
+ # disallow "internal" addresses to appear on the wire
+ route add -inet6 ::ffff:0.0.0.0 -prefixlen 96 ::1 -reject
+ route add -inet6 ::0.0.0.0 -prefixlen 96 ::1 -reject
+
+ case ${ipv6_gateway_enable} in
+ [Yy][Ee][Ss])
+ # act as a router
+ sysctl -w net.inet6.ip6.forwarding=1
+ sysctl -w net.inet6.ip6.accept_rtadv=0
+
+ # wait for DAD
+ for i in $ipv6_network_interfaces; do
+ ifconfig $i up
+ done
+ sleep `sysctl net.inet6.ip6.dad_count | awk '{print $NF}'`
+ sleep 1
+
+ # setting up interfaces
+ for i in $ipv6_network_interfaces; do
+ eval prefix=\$ipv6_prefix_$i
+ case ${prefix} in
+ '')
+ continue;
+ ;;
+ esac
+ for j in ${prefix}; do
+ case ${prefixcmd_enable} in
+ [Yy][Ee][Ss])
+ prefix $i $j::
+ ;;
+ *)
+ laddr=`ifconfig $i inet6 \
+ | grep 'inet6 fe80:' \
+ | head -1 | awk '{print $2}'`
+ hostid=`echo ${laddr} | sed \
+ -e 's/fe80:[0-9a-fA-F]+::/fe80::/' \
+ -e 's/fe80:://' -e 's/@.*//'`
+ address=$j\:${hostid}
+
+ eval hostid_$i=${hostid}
+ eval address_$i=${address}
+
+ ifconfig $i inet6 ${address} \
+ prefixlen 64 alias
+ ;;
+ esac
+
+ # subnet-router anycast address (rfc2373)
+ ifconfig $i inet6 $j:: prefixlen 64 \
+ alias anycast
+ done
+
+ ifconfig $i inet6
+ done
+
+ # again, wait for DAD's completion (for global addrs)
+ sleep `sysctl net.inet6.ip6.dad_count | awk '{print $NF}'`
+ sleep 1
+
+ # gifconfig
+ network6_gif_setup
+
+ # ipv6_router
+ case ${ipv6_router_enable} in
+ [Yy][Ee][Ss])
+ if [ -x ${ipv6_router} ]; then
+ echo -n " ${ipv6_router}"
+ ${ipv6_router} ${ipv6_router_flags}
+ fi
+ ;;
+ esac
+
+ # rtadvd
+ # This should enabled with a great care.
+ # You may want to fine-tune /etc/rtadvd.conf.
+ #
+ # And if you wish your rtadvd to receive and process
+ # router renumbering messages, specify your Router Renumbering
+ # security policy by -P option.
+ #
+ # See `man 3 ipsec_set_policy` for IPsec policy specification
+ # details.
+ # (CAUTION: This enables your routers prefix renumbering
+ # from another machine, so if you enable this, do it with
+ # enough care.)
+ #
+ case ${rtadvd_enable} in
+ [Yy][Ee][Ss])
+ # default
+ rtadvd ${ipv6_network_interfaces}
+ #
+ # Enable Router Renumbering, unicaset case
+ # (use correct src/dst addr)
+ # rtadvd -P "in ipsec
+ah/transport/fec0:0:0:1::1-fec0:0:0:10::1/require" \
+ ${ipv6_network_interfaces}
+ # Enable Router Renumbering, multicast case
+ # (use correct src addr)
+ # rtadvd -P "in ipsec
+ah/transport/ff05::2-fec0:0:0:10::1/require" \
+ ${ipv6_network_interfaces}
+ ;;
+ esac
+
+ # mroute6d
+ case ${mroute6d_enable} in
+ [Yy][Ee][Ss])
+ if [ -x ${mroute6d_program} ]; then
+ echo -n " ${mroute6d_program}"
+ ${mroute6d_program} ${mroute6d_flags}
+ fi
+ ;;
+ esac
+ ;;
+ *)
+ # act as endhost - automatically configured
+ sysctl -w net.inet6.ip6.forwarding=0
+ sysctl -w net.inet6.ip6.accept_rtadv=1
+
+ ifconfig ${ipv6_network_interfaces} up
+ rtsol ${ipv6_network_interfaces}
+
+ # install the "default interface" to kernel, which will be used
+ # as the default route when there's no router.
+ # ndp -I ${ipv6_default_interface}
+
+ # wait for DAD's completion (for global addrs)
+ sleep `sysctl net.inet6.ip6.dad_count | awk '{print $NF}'`
+ sleep 1
+
+ # gifconfig
+ network6_gif_setup
+ ;;
+ esac
+
+ echo '.'
+
+ # Let future generations know we made it.
+ #
+ network6_pass1_done=YES
+}
+
+network6_gif_setup() {
+ case ${gif_interfaces} in
+ [Nn][Oo] | '')
+ ;;
+ *)
+ for i in ${gif_interfaces}; do
+ eval peers=\$gifconfig_$i
+ case ${peers} in
+ '')
+ continue
+ ;;
+ *)
+ gifconfig $i ${peers}
+ ;;
+ esac
+ done
+ ;;
+ esac
+}
