On Tuesday,  9 May 2000 at  4:14:01 -0500, Alan Cox wrote:
> About two days ago, I tested a machine with four IDE drives
> each on its own cable as the master.  All four drives were:
> ad0: 29311MB <Maxtor 53073U6> [59554/16/63] at ata0-master using UDMA66
> I used the motherboard controller to support two of the drives.  It was a
> atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
> and a Highpoint-based ATA66 controller for the other two drives.  The
> Highpoint locked up with the "resetting devices" message as soon
> as the system was stressed.  I replaced the Highpoint controller
> with a Promise ATA66 and didn't see any problems after that.  (I've
> never seen any problems with the Maxtor's on the Intel ATA66 controller
> either.)
> In summary, same disks, three different controllers, problems only
> occur with the Highpoint controller.  (I believe the Abit BP6 uses
> the Highpoint controller.)

I've had these symptoms too, but with a Western Digital drive.  I'm
still trying to track them down.  They don't happen when running on
ata0 or ata1.  Søren suspects it to be a problem with the drive.

Finger [EMAIL PROTECTED] for PGP public key
See complete headers for address and phone numbers

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to