Hi Marius and Pyun, actually it is Chip rev. 0x2c800000 (I have overlooked that information in my first post)
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0104000-0xf0104fff,0xf0100000-0xf0103fff irq 19 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 Does that help in any way? Thanks Stefan > Gesendet: Donnerstag, 04. Februar 2016 um 01:51 Uhr > Von: "YongHyeon PYUN" <pyu...@gmail.com> > An: s....@web.de > Cc: email@example.com > Betreff: Re: Realtek 8168/8111 if_re not working in current r295091 > > On Wed, Feb 03, 2016 at 08:57:01PM +0100, s....@web.de wrote: > > After updating -current at Jan, 31st (r295091) the Realtek ethernet device > > driver of my Zotac ZBox RI323 mini pc seems to be broken: I can neither > > connect to the host even though the interface is shown as active, nor can I > > initiate connection from the host through re0. > > Reverting the kernel to my previous build -current r290151 (install date > > Nov 1st, 2015) the re0 interface is working OK. > > > > Looking through the svn logs regarding /head/sys/dev/re/if_re.c I supect, > > that Revision 290566 might have someting to do with this and that I have to > > include my Realtek Chipset to the exclusion list for "enabling RX/TX after > > initial configuration (or viceversa; I am really confused here), but I > > havent got a clue how; as I do not know how to find the right RL_HWREV_XXX > > flag for my device. > > > > You can get Chip/MAC revision information from dmesg output. > (dmesg | grep re0 would do). > _______________________________________________ firstname.lastname@example.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"