Hi all,

I'm trying to write a CD using k3b. However, when it starts, it tells me
that it can't find a CD drive to work with. Dmesg shows:

    cd0 at ata0 bus 0 scbus4 target 0 lun 0
    cd0: <PIONEER BD-ROM  BDC-207D 1.00> Removable CD-ROM SCSI device
    cd0: Serial Number NHDL064152WL
    cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
    cd0: 0MB (1 2048 byte sectors)

but also has lots of error messages:

    (cd0:ata0:0:0:0): READ(10). CDB: 28 00 00 00 00 00 00 00 01 00
    (cd0:ata0:0:0:0): CAM status: SCSI Status Error
    (cd0:ata0:0:0:0): SCSI status: Check Condition
    (cd0:ata0:0:0:0): SCSI sense: BLANK CHECK asc:0,0 (No additional
    sense information)
    (cd0:ata0:0:0:0): Error 28, Unretryable error
    (cd0:ata0:0:0:0): cddone: got error 0x1c back

I've followed all the instructions in the port's pkg-message except I
get an error when setting the sysctl:

    sysctl hw.ata.atapi_dma=1
    sysctl: unknown oid 'hw.ata.atapi_dma'

I think I've got all the correct things in my kernel: pass, scb, cd. I'm
I'm pretty sure it's not a permissions problem as it happens when I run
k3b as root too.

This is on a recent 11-stable AMD64 with up to date ports.

Thanks for any help,

    Graham


_______________________________________________
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Reply via email to