On Tue, 23 Oct 2007 18:06:08 +0200 Benjamin Lutz <[EMAIL PROTECTED]> wrote:
> I've bought an USB->Serial adapter in order to use an old serial 33.6k > modem. I've loaded the uplcom and ucom modules, but am unsure how to > proceed from here. > > The system runs FreeBSD 6.2-RELEASE-p8. When connecting the adapter, > dmesg says: > > ucom0: Prolific Technology Inc. USB-Serial Controller D, rev > 1.10/4.00, addr 3 > > usbdevs -v says: > > port 6 addr 3: full speed, power 100 mA, config 1, USB-Serial > Controller D(0x2303), Prolific Technology Inc.(0x067b), rev 4.00 > > I'd expect some device to show up in /dev, cuad1, ucom0, something like > that, but I get nothing. (cuad0 is taken by the onboard serial port, > which, alas, isn't wired to the outside of the case). Perhaps you need to load umodem(4) also? Cheers, Ian _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"