Roland Smith wrote: > On Tue, Oct 23, 2007 at 08:17:01PM +0200, Benjamin Lutz wrote: >> On Tuesday 23 October 2007 19:54:44 Roland Smith wrote: >>> On Tue, Oct 23, 2007 at 06:06:08PM +0200, Benjamin Lutz wrote: >>>> I'd expect some device to show up in /dev, cuad1, ucom0, something >>>> like that, but I get nothing. (cuad0 is taken by the onboard serial >>>> port, which, alas, isn't wired to the outside of the case). >>> Looking at ucom(4): >>> >>> FILES >>> /dev/cuaU? >>> >>> See if that exists. >> No such luck I'm afraid. There's only cuaU0, which belongs to the >> onboard serial port too. > > Does the onboard serial port work via USB? How odd! On my standard PC, > the serial ports are driven by the sio driver, and have /dev/cuad* and > /dev/ttyd* devices, noc cuaU.
No, that one's a standard serial port, driven by sio as well, and creates /dev/cuad0, /dev/cuaU0, maybe some /dev/tty* as well, I don't know. > Do you have the correct driver for the converter loaded next to ucom? > The ucom manual page gives a list of them. Yes, uplcom is the right driver. (Or at least I think so, because the device and manufacturer ids that usbdevs -v gives me match those in /usr/src/sys/dev/usb/uplcom.c .) Besides, without the uplcom module loaded, I only get an ugen device, so it seems to attach to the device ok. Cheers Benjamin _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"