On Thu, 15 Oct 2009 18:19:16 -0400, PJ <af.gour...@videotron.ca> wrote: > I am running 7.2 but cannot properly attach/detach cruze 8gb and 4gb USB > keys. > When inserted, generate errors: > da0 seems to be read correctly > but then comes arow of > (probe0:umass-sim0:0:0:1): snip CAM Status: SCSI Status Error > snip NOT READY asc:3a,0 > Medium not present > Unretryable error > then > cd0 at umass-sim0 dada,dada,dada > attempt to query device size failed; UNIT ATTENTION, Not ready to ready > change, medium may have changed > > # camcontrol devlist > <SanDisk U3 Cruzer Micro 4.04> at scbus1 target 0 lun 0 (da0,pass0) > same as above ----- --------------------------- lun 1 (pass1,cd0)
It would be good if you provide the full dmesg lines that are corresponding with this problem. By the way, I had problems with "defective by design" SanDisk USB sticks, too. This is how it looked: % dmesg | tail umass0: <SanDisk Cruzer Micro, class 0/0, rev 2.00/2.00, addr 2> on uhub2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk Cruzer Micro 8.02> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: UNIT ATTENTION, Medium not present umass0: at uhub2 port 2 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached I could not access the stick, /dev/da0 was the only device that appeared, and I could only dump the partition table (in terms of "DOS primary partitions", i. e. slices) with the "fdisk da0" command. But I could not access it. Finally, I printed out dmesg on a line printer (looks very impressing), marked the lines shown above and returned it to the shop. I'm now happy with a Sony USB stick which works excellently. > Something is not functioning & I don't understand. It did function a > while (some weeks) ago but now, no go... It did function, and now no more? I would say that if you didn't change anything on your system, the SanDisk stick is broken. Could you try the stick in another system for reference? > I did look on the web, but... > ???? Did you see a spider that made the web? :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"