At 09:53 AM 11/9/2003, Luke Kearney wrote:

please make a rough ascii sketch of your network and post the output to
the following :-

netstat -rn
ifconfig -a

in your rc.conf


Ok, I edited rc.conf and rebooted; when trying to ping myself by ip or as localhost got "Permission denied" so I then did "ipfw disable firewall" and was able to do those two pings. And when trying to then ping some other nodes again got "No route to host".

my local area network: (win-xp) (win-95) (freebsd-4.8/mini) (win-98) (win-95)

these five boxes each have a nic and all connect to a switch.

#netstat -rn

Routing tables

Destination Gateway Flags Refs Use Netif Expire UH 0 0 lo0
192.168.7 link#1 UC 1 0 ep0 00:20:af:4d:24:b7 UHLW 0 1 lo0

Destination               Gateway           Flags      Netif Expire
::1                            ::1                    UH         lo0
fe80::%ep0/64           link#1               UC         ep0
fe80::220:afff:fe4d:24b7%ep0 00:20:af:4d:24:b7  UHL  lo0
fe80::%lo0/64           fe80::1%lo0        Uc         lo0
fe80::1%lo0              link#4               UHL        lo0
ff01::/32                    ::1                   U            lo0
ff02::%ep0/32           link#1               UC          ep0
ff02::%lo0/32            ::1                    UC         lo0

#ifconfig -a ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet netmask 0xffffff00 broadcast inet6 fe80::220:afff:fe4d:24b7%ep0 prefixlen 64 scopeid 0x1 ether 00:20:af:4d:24:b7 media: Ethernet 10baseT/UTP lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%Lo0 prefixlen 64 scopeid 0x4 inet netmask 0xff000000 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552

Hey Luke, wanna hear something funny? I didn't want to take 20 minutes to write all this so I spent an hour and a half instead trying to mount a floppy and then copy the output from these commands onto it so I could then copy & paste the verbiage onto my email from a windows box. Didn't get it working though. 8^}

Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website:

[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to