On Wed, Nov 26, 2003 at 06:39:42AM -0800, Noah wrote: > I am using FreeBSD 4.8 Stable > > # boot0cfg -B -b /boot/mbr -s 1 da1 > boot0cfg: /boot/mbr: unknown or incompatible boot code > # ls -l /boot/mbr > -r--r--r-- 1 root wheel 512 Aug 24 14:26 /boot/mbr > > > so I am not clear what the issue is here?
Opps. Sorry. boot0cfg only operates on /boot/boot0 which is the FreeBSD special Master Boot Record: part of the boot0, boot1, boot2 chain. To deal with a standard MBR, you have to use fdisk(8). Try: # fdisk -B -b /boot/mbr -i da1 This will walk you through the current settings interactively, letting you generate a slice table, change the active slice and rewrite the boot code. Of course, just to confuse you, fdisk(8) will talk all about "partitions", but be assured it actually means "slices" in *BSD speak. (partitions are generated within each slice using disklabel(8) which is a BSD specific thing. slices are generic for practically all OSes that can run on the IA32 architecture from DOS onwards.) > the disk is a little bit of a different size with different partition sizes. > woudl that Make a difference. what esle can I check here? The disk geometry won't make any difference to the boot block. fdisk(8) will read in the current partition table and give you the opportunity to modify things, but don't do that unless you really do intend to wipe the disk contents. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK
pgp00000.pgp
Description: PGP signature