> Which model of the Dl360 do you have? > > ida is normally used on the Generation 1, which is a completely white > box, wheras the G2 has a black outfit, and uses the ciss driver. > But I've never seen an G1 with 1266 MHz, or were those very late series? >
It is a late G1 in a completely white outfit. > As OSType in the Setup tool I set Win NT4, which is sometimes important > for irq routing. I created a standard RAID 1 Volume, with no diag > partition whatsoever involved, and then 4.7-R and 4.8-R installed > without problems, I chose not to use bootmgr, but a standard mbr. > > worked right out of the box. > > > Do you have a chance to try again with perhaps a 4.7-R disc? I don't have a 4.7-R disc, but I haven't checked the BIOS setup. I'm going to try using the "SmartStart" disc to access the setup tools and set it to Win NT4. Thanks for your help, Olaf. -Matt _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"