Hello, In the past I've always been able to mount USB devices (a card reader and a webcam) as msdosfs at /dev/da0 or some such... my new camera's not playing that game.
It's a Kodak EasyShare DX4530. I've unplugged all my other usb devices to test things, and booted up with it plugged in. usbdevs -dv shows: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port 1 addr 2: full speed, self powered, config 1, KODAK EasyShare DX4530 Zoom Digital Camera(0x0576), Eastman Kodak Company(0x040a), rev 1.00 ugen0 port 2 addr 3: full speed, self powered, config 1, USB HUB(0x0e01), vendor 0x0000(0x0000), rev 0.04 uhub1 port 1 powered port 2 powered port 3 powered port 4 powered -------------------------------- Only three new entries are created in /dev when I plug it in: /dev/ugen0, dev/ugen0.1 and /dev/ugen0.2, none of which are mountable in the normal way as msdosfs (I get "Block device needed") Digikam detects it fine and correctly, but when I try to look at it says "Failed to initialize camera. Please ensure camera is connected properly and turned on" In the meantime Windows has no problem with it at all. This state of affairs must not be allowed to continue, by mine honour. plugging it in gives -bash-2.05b$ ugen0: Eastman Kodak Company KODAK EasyShare DX4530 Zoom Digital Camera, rev 2.00/1.00, addr 2 and unplugging it -bash-2.05b$ ugen0: at uhub0 port 1 (addr 2) disconnected ugen0: detached Any help or advice greatly appreciated Cheers, Ben _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"