Hi

I've got a 3g usb stick that works fine with 8.0-STABLE from Jan 3rd 2010, but does not with 8.1-RELEASE. Its a Vodafone branded stick bought in New Zealand.


With FreeBSD 8.0 it prints this when I insert the stick:

usb_test_autoinstall: Eject CD command status: USB_ERR_PENDING_REQUESTS
ugen6.2: <ZTE,Incorporated> at usbus6
ugen6.2: <ZTE,Incorporated> at usbus6 (disconnected)
ugen6.2: <ZTE,Incorporated> at usbus6
u3g0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus6
u3g0: Found 5 ports.
umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev 2.00/0.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present

[...@mylar mjl]$ sudo usbconfig -u 6 dump_info
ugen6.1: <EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

On FreeBSD 8.1 it prints this:

ugen6.2: <ZTE,Incorporated> at usbus6

(and nothing else)

[...@mylar mjl]$ sudo usbconfig -d 6.2 dump_device_desc
ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=255 md=HOST spd=HIGH (480Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x19d2
  idProduct = 0x2000
  bcdDevice = 0x0000
  iManufacturer = 0x0002  <ZTE,Incorporated>
  iProduct = 0x0001  <ZTE CDMA Technologies MSM>
  iSerialNumber = 0x0003  <P673A2VDF_MS>
  bNumConfigurations = 0x0001
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to