On 08/28/10 19:50, Hans Petter Selasky wrote:
On Saturday 28 August 2010 07:10:38 Matthew Luckie wrote:
Hi
I've got a 3g usb stick that works fine with 8.0-STABLE from Jan 3rd
2010, but does not with 8.1-RELEASE. Its a Vodafone branded stick
bought in New Zealand.
With FreeBSD 8.0 it prints this when I insert the stick:
usb_test_autoinstall: Eject CD command status: USB_ERR_PENDING_REQUESTS
ugen6.2:<ZTE,Incorporated> at usbus6
ugen6.2:<ZTE,Incorporated> at usbus6 (disconnected)
ugen6.2:<ZTE,Incorporated> at usbus6
u3g0:<ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
2.00/0.00, addr 2> on usbus6
u3g0: Found 5 ports.
umass0:<ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
2.00/0.00, addr 2> on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0:<ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
[...@mylar mjl]$ sudo usbconfig -u 6 dump_info
ugen6.1:<EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen6.2:<ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0
md=HOST spd=HIGH (480Mbps) pwr=ON
On FreeBSD 8.1 it prints this:
ugen6.2:<ZTE,Incorporated> at usbus6
(and nothing else)
[...@mylar mjl]$ sudo usbconfig -d 6.2 dump_device_desc
ugen6.2:<ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=255
md=HOST spd=HIGH (480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x19d2
idProduct = 0x2000
bcdDevice = 0x0000
iManufacturer = 0x0002<ZTE,Incorporated>
iProduct = 0x0001<ZTE CDMA Technologies MSM>
iSerialNumber = 0x0003<P673A2VDF_MS>
bNumConfigurations = 0x0001
Have you loaded the u3g driver before plugging the device. Also try:
Yes, I have.
[...@mylar mjl]$ sudo kldload /boot/kernel/u3g.ko
kldload: can't load /boot/kernel/u3g.ko: File exists
module_register: module uhub/u3g already exists!
Module uhub/u3g failed to register: 17
usbconfig -d 6.2 set_config 0
ugen6.2: <ZTE,Incorporated> at usbus6
umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
2.00/0.00, addr 2> on usbus6
cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd1: <ZTE USB SCSI CD-ROM 2.31> Removable CD-ROM SCSI-2 device
cd1: 40.000MB/s transfers
cd1: cd present [31484 x 2048 byte records]
Sadly no /dev/cuaU* entries. After the set_config, I have new /dev
entries for cd1, iso9660, pass1, and of course ugen6.2.
[...@mylar ~]$ sudo usbconfig -d 6.2 dump_device_desc
ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0
md=HOST spd=HIGH (480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x19d2
idProduct = 0x2000
bcdDevice = 0x0000
iManufacturer = 0x0002 <ZTE,Incorporated>
iProduct = 0x0001 <ZTE CDMA Technologies MSM>
iSerialNumber = 0x0003 <P673A2VDF_MS>
bNumConfigurations = 0x0001
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"
