On Monday 30 August 2010 08:56:36 David Naylor wrote:
> On Monday 30 August 2010 08:33:30 Hans Petter Selasky wrote:
> > Hi,
> > 
> > Could you dump device descriptor and current configuration descriptor
> > using usbconfig. I need the vendor ID and product ID at least to be able
> > to debug this issue.
> 
> # usbconfig -d ugen0.2 dump_device_desc
> ugen0.2: <CIF Single Chip Pixart Imaging Inc.> at usbus0, cfg=0 md=HOST
> spd=FULL (12Mbps) pwr=ON
> 
>   bLength = 0x0012
>   bDescriptorType = 0x0001
>   bcdUSB = 0x0110
>   bDeviceClass = 0x00ff
>   bDeviceSubClass = 0x00ff
>   bDeviceProtocol = 0x00ff
>   bMaxPacketSize0 = 0x0008
>   idVendor = 0x093a
>   idProduct = 0x2468
>   bcdDevice = 0x0100
>   iManufacturer = 0x0001  <Pixart Imaging Inc. >
>   iProduct = 0x0002  <CIF Single Chip     >
>   iSerialNumber = 0x0000  <no string>
>   bNumConfigurations = 0x0001
> 
> # usbconfig -d ugen0.2 dump_curr_config_desc
> ugen0.2: <CIF Single Chip Pixart Imaging Inc.> at usbus0, cfg=0 md=HOST
> spd=FULL (12Mbps) pwr=ON

Hi,

This information looks Ok.

Try installing webcamd from I4B SVN:

Compile using:

make -j3 HAVE_DEBUG=YES

http://www.selasky.org/hans_petter/video4bsd

Then start webcamd in the foreground and post debug log.

--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to