I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies itself as:

# /var/log/messages

Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN, class 0/0, rev 
2.00/0.01, addr 3> on usbus1
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. 
CDB: 0 0 0 0 0 0
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI 
Status Error
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check 
Condition
Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT 
READY asc:3a,0 (Medium not present)
Nov 11 13:40:09 wiggles kernel: cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0
Nov 11 13:40:09 wiggles kernel: cd1: <Motorola USB Card > Removable CD-ROM 
SCSI-0 device
Nov 11 13:40:09 wiggles kernel: cd1: 40.000MB/s transfers
Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size failed: NOT 
READY, Medium not present

# usbconfig -u 1 -a 3 dump_curr_config_desc
ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=ON


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0020 
    bNumInterfaces = 0x0001 
    bConfigurationValue = 0x0001 
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0080 
    bMaxPower = 0x00c8 

    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x0008 
      bInterfaceSubClass = 0x0006 
      bInterfaceProtocol = 0x0050 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

Unfortunately it's not recognized by the ural driver. Has anyone an idea what I
could try? Add a usb device ID somewhere?

Emanuel
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to