Hans Petter Selasky <hsela...@c2i.net> wrote:
> On Thursday 11 November 2010 17:36:38 Emanuel Haupt wrote:
> > Hans Petter Selasky <hsela...@c2i.net> wrote:
> > > On Thursday 11 November 2010 17:00:00 Emanuel Haupt wrote:
> > > > I've got a Motorola TER/GUSB3-E Wireless USB stick that
> > > > identifies itself as:
> > > > 
> > > > # /var/log/messages
> > > > 
> > > > Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
> > > > Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN,
> > > > class 0/0, rev 2.00/0.01, addr 3> on usbus1 Nov 11 13:40:09
> > > > wiggles kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY.
> > > > CDB: 0 0 0 0 0 0 Nov 11 13:40:09 wiggles kernel:
> > > > (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error Nov 11
> > > > 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI
> > > > status: Check Condition Nov 11 13:40:09 wiggles kernel:
> > > > (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0
> > > > (Medium not present) Nov 11 13:40:09 wiggles kernel: cd1 at
> > > > umass-sim0 bus 0 scbus2 target 0 lun 0 Nov 11 13:40:09 wiggles
> > > > kernel: cd1: <Motorola USB Card > Removable CD-ROM SCSI-0
> > > > device Nov 11 13:40:09 wiggles kernel: cd1: 40.000MB/s
> > > > transfers Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query
> > > > device size failed: NOT READY, Medium not present
> > > > 
> > > > # usbconfig -u 1 -a 3 dump_curr_config_desc
> > > > ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST
> > > > spd=HIGH (480Mbps) pwr=ON
> > > > 
> > > >  Configuration index 0
> > > >  
> > > >     bLength = 0x0009
> > > >     bDescriptorType = 0x0002
> > > >     wTotalLength = 0x0020
> > > >     bNumInterfaces = 0x0001
> > > >     bConfigurationValue = 0x0001
> > > >     iConfiguration = 0x0000  <no string>
> > > >     bmAttributes = 0x0080
> > > >     bMaxPower = 0x00c8
> > > >     
> > > >     Interface 0
> > > >     
> > > >       bLength = 0x0009
> > > >       bDescriptorType = 0x0004
> > > >       bInterfaceNumber = 0x0000
> > > >       bAlternateSetting = 0x0000
> > > >       bNumEndpoints = 0x0002
> > > >       bInterfaceClass = 0x0008
> > > >       bInterfaceSubClass = 0x0006
> > > >       bInterfaceProtocol = 0x0050
> > > >       iInterface = 0x0000  <no string>
> > > >      
> > > >      Endpoint 0
> > > >      
> > > >         bLength = 0x0007
> > > >         bDescriptorType = 0x0005
> > > >         bEndpointAddress = 0x0081  <IN>
> > > >         bmAttributes = 0x0002  <BULK>
> > > >         wMaxPacketSize = 0x0200
> > > >         bInterval = 0x0000
> > > >         bRefresh = 0x0000
> > > >         bSynchAddress = 0x0000
> > > >      
> > > >      Endpoint 1
> > > >      
> > > >         bLength = 0x0007
> > > >         bDescriptorType = 0x0005
> > > >         bEndpointAddress = 0x0001  <OUT>
> > > >         bmAttributes = 0x0002  <BULK>
> > > >         wMaxPacketSize = 0x0200
> > > >         bInterval = 0x0000
> > > >         bRefresh = 0x0000
> > > >         bSynchAddress = 0x0000
> > > > 
> > > > Unfortunately it's not recognized by the ural driver. Has
> > > > anyone an idea what I could try? Add a usb device ID somewhere?
> > > 
> > > Hi,
> > > 
> > > If you use the "dump_device_desc" command you get the idVendor and
> > > idProduct you need for the ID-table in
> > > sys/dev/usb/wlan/if_ural.c .
> > > 
> > > --HPS
> > 
> > It's:
> > 
> > ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH
> > (480Mbps) pwr=ON
> > 
> >   bLength = 0x0012
> >   bDescriptorType = 0x0001
> >   bcdUSB = 0x0200
> >   bDeviceClass = 0x0000
> >   bDeviceSubClass = 0x0000
> >   bDeviceProtocol = 0x0000
> >   bMaxPacketSize0 = 0x0040
> >   idVendor = "
> >   idProduct = 0x2578
> >   bcdDevice = 0x0001
> >   iManufacturer = 0x0001  <Ralink>
> >   iProduct = 0x0002  <802.11 bg WLAN>
> >   iSerialNumber = 0x0003  <retrieving string failed>
> >   bNumConfigurations = 0x0001
> > 
> > I guess I'll have to fit "0x148f" in there somewhere - not sure
> > exactly where to add though. Any help would be appreciated.
> > 
> > Emanuel
> 
> I guess you can:
> 
> grep -rE "RALINK.*RT2573" /sys/dev/usb/
> 
> And duplicate one of those entries.

According to [1], "0x148f" seem to use RT2870.

Emanuel

[1] http://ralinkce.blogspot.com/
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to