Hans Petter Selasky <hsela...@c2i.net> wrote:
> On Thursday 11 November 2010 17:00:00 Emanuel Haupt wrote:
> > I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies
> > itself as:
> > 
> > # /var/log/messages
> > 
> > Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
> > Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN,
> > class 0/0, rev 2.00/0.01, addr 3> on usbus1 Nov 11 13:40:09 wiggles
> > kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0
> > 0 Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM
> > status: SCSI Status Error Nov 11 13:40:09 wiggles kernel:
> > (probe0:umass-sim0:0:0:0): SCSI status: Check Condition Nov 11
> > 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT
> > READY asc:3a,0 (Medium not present) Nov 11 13:40:09 wiggles kernel:
> > cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0 Nov 11 13:40:09
> > wiggles kernel: cd1: <Motorola USB Card > Removable CD-ROM SCSI-0
> > device Nov 11 13:40:09 wiggles kernel: cd1: 40.000MB/s transfers
> > Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size
> > failed: NOT READY, Medium not present
> > 
> > # usbconfig -u 1 -a 3 dump_curr_config_desc
> > ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH
> > (480Mbps) pwr=ON
> > 
> > 
> >  Configuration index 0
> > 
> >     bLength = 0x0009
> >     bDescriptorType = 0x0002
> >     wTotalLength = 0x0020
> >     bNumInterfaces = 0x0001
> >     bConfigurationValue = 0x0001
> >     iConfiguration = 0x0000  <no string>
> >     bmAttributes = 0x0080
> >     bMaxPower = 0x00c8
> > 
> >     Interface 0
> >       bLength = 0x0009
> >       bDescriptorType = 0x0004
> >       bInterfaceNumber = 0x0000
> >       bAlternateSetting = 0x0000
> >       bNumEndpoints = 0x0002
> >       bInterfaceClass = 0x0008
> >       bInterfaceSubClass = 0x0006
> >       bInterfaceProtocol = 0x0050
> >       iInterface = 0x0000  <no string>
> > 
> >      Endpoint 0
> >         bLength = 0x0007
> >         bDescriptorType = 0x0005
> >         bEndpointAddress = 0x0081  <IN>
> >         bmAttributes = 0x0002  <BULK>
> >         wMaxPacketSize = 0x0200
> >         bInterval = 0x0000
> >         bRefresh = 0x0000
> >         bSynchAddress = 0x0000
> > 
> >      Endpoint 1
> >         bLength = 0x0007
> >         bDescriptorType = 0x0005
> >         bEndpointAddress = 0x0001  <OUT>
> >         bmAttributes = 0x0002  <BULK>
> >         wMaxPacketSize = 0x0200
> >         bInterval = 0x0000
> >         bRefresh = 0x0000
> >         bSynchAddress = 0x0000
> > 
> > Unfortunately it's not recognized by the ural driver. Has anyone an
> > idea what I could try? Add a usb device ID somewhere?
> > 
> 
> Hi,
> 
> If you use the "dump_device_desc" command you get the idVendor and
> idProduct you need for the ID-table in sys/dev/usb/wlan/if_ural.c .
> 
> --HPS

It's:

ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = "
  idProduct = 0x2578
  bcdDevice = 0x0001
  iManufacturer = 0x0001  <Ralink>
  iProduct = 0x0002  <802.11 bg WLAN>
  iSerialNumber = 0x0003  <retrieving string failed>
  bNumConfigurations = 0x0001

I guess I'll have to fit "0x148f" in there somewhere - not sure exactly
where to add though. Any help would be appreciated.

Emanuel
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to