On Sunday 23 October 2011 10:31:50 Franz Schwartau wrote: > Hi again, > > meanwhile I did some debugging.
Hi, What does "usbconfig" output? Did you load the xhci module? What does your dmesg look like? --HPS > > QuickPort dump_device_desc: > http://pastebin.com/h62jLHui > > QuickPort dump_curr_config_desc: > http://pastebin.com/6rheBiMi > > Debug messages (hw.usb.debug=4): > http://paste2.org/p/1733421 > > I found an external HDD enclosure (Sharkoon Rapid-Case 3.5" SATA USB3.0) > which uses the same SATA bridge chip (ASM1051, Vendor 0x174C, Product > 0x55AA). Attached to an USB port it uses high speed instead of full > speed of the QuickPort. > > Rapid-Case dump_device_desc: > http://pastebin.com/B7suMZG7 > > Rapid-Case dump_curr_config_desc: > http://pastebin.com/D6xPyYUp > > The only difference I could find is wMaxPacketSize in Endpoint 0 and > Endpoint 1 is set to 0x40 for the QuickPort. The Rapid-Case external > enclosure has set wMaxPacketSize to 0x200. > > Having a look at lsusb's output under Linux wMaxPacketSize is set to > 0x200 even for the QuickPort: > > http://pastebin.com/fMcxhKax > > If more debug information is needed don't hesitate to ask. :-) > > Best regards > Franz > > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org" _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"