Hans Petter Selasky wrote:
On Saturday 24 March 2012 18:14:41 Denver Hull wrote:
I discovered this when I saw an update to input-wacom at
freshports.org. I've installed cuse4bsd, the new input-wacom, and the
I believe I've followed all the instructions properly, and when I start
webcamd, everything seems to be correct:
Attached ugen1.2 to cuse unit 0
According to dmesg, ugen1.2 is the correct device (I have a Bamboo Pen):
ugen1.2:<Wacom Co.,Ltd.> at usbus1
The /dev/input/event0 node is indeed created. However, when I start X,
I get the following:
(EE) stylus: Wacom X driver can't grab event device (Bad address)
(EE) eraser: Wacom X driver can't grab event device (Bad address)
(EE) cursor: Wacom X driver can't grab event device (Bad address)
(EE) pad: Wacom X driver can't grab event device (Bad address)
(EE) touch: Wacom X driver can't grab event device (Bad address)
Protocol not supported by server
The last line repeats indefinitely, and X never finishes starting up.
The system I'm trying this on is 8.3-PRERELEASE. I had tried this
quickly a while ago on 8.2-STABLE with similar results.
Does anyone have any ideas about what might be wrong?
I think the wacom has two interfaces.
So you need to do two instances of webcamd, using -i 0 and -i 1 .
Else search google for webcamd-22.214.171.124
Thanks for the reply. I did have trouble figuring out how to get
webcamd started properly. The start script in /usr/local/etc/rc.d looks
like it needs at least two parameters, but it wasn't clear what they
should be. When I get a chance I'll look at that again & see if I can
figure something out. I'll let you know how I do.
The "Protocol not supported" problem was something else, not related to
the tablet or webcamd.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"