On Thu, Nov 14, 2013 at 10:24 AM, Hans Petter Selasky <h...@bitfrost.no> wrote:
> On 11/14/13 15:42, Eitan Adler wrote:
>>
>> On Thu, Nov 14, 2013 at 2:05 AM, Hans Petter Selasky <h...@bitfrost.no>
>> wrote:
>>>
>>> On 11/14/13 05:08, Eitan Adler wrote:
>>>>
>>>>
>>>> The mouse driver fails to attach when plugging in my USB mouse.
>>>>
>>>> FreeBSD gravity.local 11.0-CURRENT FreeBSD 11.0-CURRENT #5 r257754:
>>>> Thu Nov 7 12:12:51 EST 2013
>>>> root@gravity.local:/usr/obj/usr/src/sys/EADLER amd64
>>>>
>>>>> From boot:
>>>>
>>>>
>>>> [52341] ugen0.2: <Logitech> at usbus0
>>>> [52341] ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev
>>>> 2.00/27.20, addr 11> on usbus0
>>>> [52341] ums0: 8 buttons and [XYZT] coordinates ID=0
>>>> [54057] ugen0.2: <Logitech> at usbus0 (disconnected)
>>>> [54057] ums0: at uhub0, port 1, addr 11 (disconnected)
>>>> [54058] xhci_do_command: Command timeout!
>>>> [54058] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT,
>>>> ignored)
>>>
>>>
>>>
>>> What USB controllers does this system have?
>>>
>>> --HPS
>>>
>>
>> [10005 root@gravity (100%) /home/eitan ]#usbconfig
>> ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
>> (5.0Gbps) pwr=SAVE (0mA)
>> ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
>> (480Mbps) pwr=SAVE (0mA)
>> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH
>> (480Mbps) pwr=SAVE (0mA)
>> ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST
>> spd=HIGH (480Mbps) pwr=SAVE (0mA)
>> ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST
>> spd=HIGH (480Mbps) pwr=SAVE (0mA)
>> ugen2.3: <Lenovo EasyCamera Azurewave> at usbus2, cfg=0 md=HOST
>> spd=HIGH (480Mbps) pwr=ON (500mA)
>> ugen1.4: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL
>> (12Mbps) pwr=ON (0mA)
>> ugen1.3: <Linksys AE1000 Linksys> at usbus1, cfg=0 md=HOST spd=HIGH
>> (480Mbps) pwr=ON (450mA)
>>
>>
>
> pciconf -lv
xhci0@pci0:0:20:0: class=0x0c0330 card=0x397717aa chip=0x1e318086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB xHCI Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:0: class=0x0c0320 card=0x397717aa chip=0x1e2d8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB Enhanced
Host Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:0: class=0x0c0320 card=0x397717aa chip=0x1e268086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB Enhanced
Host Controller'
class = serial bus
subclass = USB
ahci0@pci0:0:31:2: class=0x010601 card=0x397717aa chip=0x1e038086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series Chipset Family 6-port SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
sdhci_pci0@pci0:3:0:2: class=0x080501 card=0x397617aa chip=0x2391197b
rev=0x30 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'Standard SD Host Controller'
class = base peripheral
subclass = SD host controller
--
Eitan Adler
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
