On Wed, 22 Jan 2014 15:38:44 +0100 Hans Petter Selasky <h...@bitfrost.no> wrote about Re: ATP USB flash failure (regression?):
HPS> > Well, plugging is not entirely easy in this case, because this HPS> > device is sitting directly on USB header pins on the mainboard. But HPS> > I'll give it a try. HPS> usbconfig -d X.Y reset HPS> also does the trick. Yes, reset works, and the device gets rescanned. But it is still using the same quirks and fails: umass0: at uhub3, port 5, addr 4 (disconnected) umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:8:0:-1: Attached to scbus8 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command cu Gerrit _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"