Hi, folks. Is there a way to obtain the name of an ugen device that
corresponds to a particular ums/uep/uhid device?
The situation I'm working with is this: there's a (custom) DEVD
rule that executes a script when any new "ums" or "uhid" device is
created. This script has access to the device name (and any other
info DEVD provides), and needs to figure out manufacturer name,
product name and ID numbers of this device. To do that, it parses
the output of this command:
usbconfig -d ugen<unit>.<address> dump_device_desc
The question is how should the script obtain these <unit> and
Now, when a new device is attached DEVD receives a message like this:
+uhid0 at bus=1 hubaddr=1 port=3 devaddr=2 interface=0
vendor=0x0079 product=0x0011 devclass=0x00 devsubclass=0x00
sernum="" release=0x0106 mode=host intclass=0x03 intsubclass=0x00
intprotocol=0x00 on uhub0
(The correct ugen for this device happens to be ugen3.2).
... or a message like this:
+ums0 at bus=0 hubaddr=2 port=2 devaddr=3 interface=1
vendor=0x046d product=0xc52b devclass=0x00 devsubclass=0x00
sernum="" release=0x1201 mode=host intclass=0x03 intsubclass=0x01
intprotocol=0x02 on uhub3
(In this case the correct ugen is ugen0.3).
It seems that we have the correct <address> number in the "devaddr"
variable, but the correct <unit> number is nowhere to be found.
So, again, given an ums/uep/uhid device name (and, possibly
<address> number), how should one fine what to pass into
usbconfig's "ugen<unit>.<address>" parameter?
(This question is triggered by the discussion in PR 183478 ).
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"