Hello world! :-)

I have changed my machine, there is a built-in GOBI2000 / HP UN2420
3G/GPS module installable as MiniPCI card and visible as USB device. I
have added its VID/PID to the usbdevs and u3g.c module, so after
recompilation it gets recognised by u3g module and apropriate
/dev/cuaU* device shows up..

The problem is that device does not store firmware inside non-volatile
memory, so user needs to upload it after power-on. I have the firmware
files. I can test modem with success after reboot from Win7 which
uploads firmware into device. Still, I need to upload the firmware
somehow on my FreeBSD.

The upload protocol is QDL and /dev/cuaU0 shows up waiting for
command. Which utility can I use to upload firmware with QDL? I have
seen one post [1] regarding this problem in the past but the QDL
utility was not named explicitly.

Any hints welcome! :-)

Tomek

[1] http://lists.freebsd.org/pipermail/freebsd-usb/2010-October/009384.html

-- 
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to