Toshiba DynaBook SS RX1 TA106E/22W にFreeBSDをインストールしました。

FreeBSD6.2-RELEASE のCDROMからブートしインストール、


acpi_toshiba.ko をロードすることで、powerdによるCPUクロックコントロールも可能。

dd if=/dev/zero of=/tmp/tmp.dat bs=10240 でHDDの書き込み速度をはかってみると、
189839360 bytes transferred in 5.149835 secs (36863192 bytes/sec)

/usr/src/bin/csh のコンパイル速度(X,firefox,thunderbird起動中)は、
#time make
20.319u 4.876s 0:27.43 91.7%    6111+1043k 601+14io 150pf+0w

#time make -j 2
21.006u 4.956s 0:14.10 184.0%   6149+1051k 1+349io 0pf+0w


今まで使用していた、Dynabook SS2120 DS11L/2(PentiumM1.1GHz Mem512)



Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Tue Jul 17 16:14:17 JST 2007
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         U7500  @ 1.06GHz (1064.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f2  Stepping = 2

  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 1601503232 (1527 MB)
avail memory = 1555562496 (1483 MB)
ACPI APIC Table: <TOSHIB A0058   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <TOSHIB A0058> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5f650000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcff8-0xcfff mem
0xffc80000-0xffcfffff,0xe0000000-0xefffffff,0xffc40000-0xffc7ffff irq 16 at 
device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> at device 2.1 on pci0
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port 0xbfe0-0xbfff 
mem 0xff9e0000-0xff9fffff irq 16 at
device 0.0 on pci1
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xff8f0000-0xff8fffff irq 18 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: xx:xx:xx:xx:xx:xx
ath0: mac 10.2 phy 6.1 radio 10.2
uhci0: <UHCI (generic) USB controller> port 0xafe0-0xafff irq 23 at device 29.0 
on pci0
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xaf80-0xaf9f irq 19 at device 29.1 
on pci0
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xaf60-0xaf7f irq 18 at device 29.2 
on pci0
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xaf40-0xaf5f irq 16 at device 29.3 
on pci0
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffc3fc00-0xffc3ffff 
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <TOSHIBA Optical Drive Controller, class 0/0, rev 2.00/0.00, addr 2> on 
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
cbb0: <PCI-CardBus Bridge> at device 11.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <1394 Open Host Controller Interface> at device 11.1 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:b1:ed:92
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:b1:ed:92
fwe0: Ethernet address: 02:00:39:b1:ed:92
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:39:00:00:b1:ed:92 @ 0xfffe00000000, S400, maxrec 
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x14e4000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci3: <base peripheral> at device 11.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port 
0xaf38-0xaf3f,0xaf34-0xaf37,0xaf28-0xaf2f,0xaf24-0xaf27,0xaf10-0xaf1f mem
0xffc3f800-0xffc3fbff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: port not implemented
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: port not implemented
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: port not implemented
ata5: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_toshiba0: <Toshiba HCI Extras> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid ORM0000 
on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Mitsumi Mitsumi Quick Scroll Mouse (USB), class 0/0, rev 1.00/1.60, addr 
2> on uhub0
ums0: 3 buttons and Z dir.
ugen0: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/c.10, addr 2> 
on uhub1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 114473MB <TOSHIBA MK1237GSX DL130M> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1 is ntfs/TOSHIBA SYSTEM VOLUME.
GEOM_LABEL: Label for provider ad4s2 is ntfs/S3A6158D002.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-844S 1.01> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s3a