As requested

[root@ /root]# ifconfig -a
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
    ether bc:ae:c5:27:ae:57
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active
em1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
    ether bc:ae:c5:27:ae:57
    media: Ethernet autoselect (1000baseT <full-duplex>)
    status: active
usbus0: flags=10001<UP> metric 0 mtu 0
usbus1: flags=10001<UP> metric 0 mtu 0
usbus2: flags=10001<UP> metric 0 mtu 0
usbus3: flags=10001<UP> metric 0 mtu 0
usbus4: flags=10001<UP> metric 0 mtu 0
usbus5: flags=10001<UP> metric 0 mtu 0
usbus6: flags=10001<UP> metric 0 mtu 0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
vboxnet0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
    ether 0a:00:27:00:00:00
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
    ether bc:ae:c5:27:ae:57
    inet 10.31.45.11 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.13 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.14 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.15 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.16 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.17 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.54 netmask 0xffffff00 broadcast 10.31.45.255
    inet 10.31.45.10 netmask 0xffffff00 broadcast 10.31.45.255
    media: Ethernet autoselect
    status: active
    laggproto lacp
    laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
    laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    ether 32:9f:31:8f:6a:1c
    id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
    maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
    root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
    member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
            ifmaxaddr 0 port 12 priority 128 path cost 20000
    member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
            ifmaxaddr 0 port 14 priority 128 path cost 2000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
    ether 02:a6:7d:00:0e:0a


[root@ /root]# arp -an
? (10.31.45.16) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.17) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.20) at 00:1b:21:7d:70:94 on lagg0 expires in 1196 seconds [ethernet]
? (10.31.45.54) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.10) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.11) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.13) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.14) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.15) at bc:ae:c5:27:ae:57 on lagg0 permanent [ethernet]
? (10.31.45.1) at 00:24:01:2a:37:52 on lagg0 expires in 1200 seconds [ethernet]


[root@ /root]# ndp -n -i bridge0
linkmtu=0, maxmtu=0, curhlim=64, basereachable=30s0ms, reachable=36s, retrans=1s0ms
Flags: nud accept_rtadv
[root@ /root]# ndp -n -i epair0a
linkmtu=0, maxmtu=0, curhlim=64, basereachable=30s0ms, reachable=15s, retrans=1s0ms
Flags: nud accept_rtadv
[root@ /root]# ndp -n -a
Neighbor Linklayer Address Netif Expire S Flags
[root@ /root]#


[root@ /root]# netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            10.31.45.1         UGS        83   625017  lagg0
10.31.45.0/24      link#12            U          11     2393  lagg0
10.31.45.10        link#12            UHS         0       19    lo0
10.31.45.11        link#12            UHS         0       67    lo0
10.31.45.13        link#12            UHS         0        0    lo0
10.31.45.14        link#12            UHS         0        0    lo0
10.31.45.15        link#12            UHS         0        0    lo0
10.31.45.16        link#12            UHS         0        0    lo0
10.31.45.17        link#12            UHS         0        0    lo0
10.31.45.54        link#12            UHS         0    42503    lo0
127.0.0.1          link#10            UH          0        0    lo0

Internet6:
Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%lo0/64 link#10 U lo0 fe80::1%lo0 link#10 UHS lo0 ff01:a::/32 fe80::1%lo0 U lo0 ff02::%lo0/32 fe80::1%lo0 U lo0


Frank

On 5/18/2011 7:10 PM, Bjoern A. Zeeb wrote:
On May 18, 2011, at 4:41 PM, Frank Razenberg wrote:

The combination of VirtualBox 4.0.6 + VIMAGE gave me a lot of kernel panics so 
yesterday I checked out 8.2-STABLE and VirtualBox 4.0.8. The kernel panics are 
mostly gone. My problem now is that the epair interface is not reachable from 
any pc other than the freebsd host. Services on the jail can be accessed from 
the host but inside the jail no network connectivity seems to work.
I've put epair0a and lagg0 on a bridge. This used to work. Is there anything I 
am missing or is this a bug?
Someone output of ifconfig -a, arp -an, ndp -n, netstat -rn, ... would
certainly help.  I am aware of one bug that epair can stop passing packets
but ETIME currently to look.

/bz


_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to 
"freebsd-virtualization-unsubscr...@freebsd.org"

Reply via email to