It wasn't ran with -ampdu, but I guess that doesn't matter now.
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
ssid foobar channel 1 (2412 MHz 11g ht/20) bssid c0:c1:c0:35:19:88
regdomain 33 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 3:128-bit txpower 20 bmiss 7 scanvalid 60
protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme burst
The alloc errors were with the patch, when I was trying to get the
network up and running manually after multiuser. I can't recall that
I've ever gotten ath networking working after a boot without it in
rc.conf. I've brought it down, unloaded it, and brought it back but
it's worked. It might just be some random thing where if it doesn't
have networking at boot I can't get it later.
Whatever's going on, it's odd. And if you're going wtf, does that mean
maybe a hardware issue? What's linux do? Whatever it's doing, the
speed it fails is dependent on the amount of ram.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"