On Thu, 25 Jul 2013, Adrian Chadd wrote:
Try jsut doing:
ifconfig wlan0 create wlandev iwn0
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
.. ie, don't do an ifconfig iwn0 up
Same result. I ran with ifconfig_wlan0="WPA" removed from /etc/rc.conf
else wpa_supplicant would start:
ifconfig wlan0 destroy
ifconfig wlan0 create wlandev iwn0
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
On 25 July 2013 15:25, Sean C. Farley <s...@freebsd.org> wrote:
After upgrading my laptop from 8.4-STABLE to 9-STABLE, I have been unable to
use the wireless NIC. The indicator light will flash for a moment and
surrender. The error is always the same and reproducible with "ifconfig
iwn0 up". The system is 9-STABLE (r253048). This appears to be the same or
similar to PR 175053: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/175053
Boot:
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf8000000-0xf8001fff irq 17 at
device 0.0 on pci4
Card details:
iwn0@pci0:4:0:0: class=0x028000 card=0x11218086 chip=0x42358086
rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ultimate N WiFi Link 5300'
class = network
bar [10] = type Memory, range 64, base 0xf8000000, size 8192, enabled
cap 01[c8] = powerspec 3 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1)
speed 2.5(2.5) ASPM L1(L0s/L1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 00216affff985c6e
Error (same each time except for time):
wlan0: link state changed to UP
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "SYSASSERT" (0x00000005)
program counter = 0x00003130
source line = 0x00000585
error data = 0x0000000100000000
branch link = 0x0000312A0000312A
interrupt link = 0x0000091600000000
time = 1611815765
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=2 queued=0
tx ring 4: qid=4 cur=67 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=0
wlan0: link state changed to DOWN
vmstat -i:
...
irq258: iwn0 973 0
...
Any ideas on what is broken and how to get it to work?
Please Cc me as I am not on this specific list.
Thank you.
Sean
--
s...@freebsd.org
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
