On Thu, 25 Jul 2013, Adrian Chadd wrote:

Ok, then I have no idea.

There's active work on iwn going on in -HEAD. I suggest updating to
that and then tracking development. No, I won't be backporting
anything to -9 or -8; someone else will have to take charge of that
(and field support queries when things don't work.)

Thank you for the help. I did see your iwn RFC when I was looking for other reports of this problem. I will try a kernel from -HEAD to see if it helps. BTW, any idea what changes between 8 and 9 may have caused this to stop working? The firmware is the same for 8, 9 and -HEAD.


On 25 July 2013 16:38, Sean C. Farley <s...@freebsd.org> wrote:
On Thu, 25 Jul 2013, Adrian Chadd wrote:

Try jsut doing:

ifconfig wlan0 create wlandev iwn0
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf

.. ie, don't do an ifconfig iwn0 up


Same result.  I ran with ifconfig_wlan0="WPA" removed from /etc/rc.conf else
wpa_supplicant would start:
ifconfig wlan0 destroy

ifconfig wlan0 create wlandev iwn0
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf


On 25 July 2013 15:25, Sean C. Farley <s...@freebsd.org> wrote:

After upgrading my laptop from 8.4-STABLE to 9-STABLE, I have been unable
to
use the wireless NIC.  The indicator light will flash for a moment and
surrender.  The error is always the same and reproducible with "ifconfig
iwn0 up".  The system is 9-STABLE (r253048).  This appears to be the same
or
similar to PR 175053:
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/175053

Boot:
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf8000000-0xf8001fff irq 17
at
device 0.0 on pci4

Card details:
iwn0@pci0:4:0:0:        class=0x028000 card=0x11218086 chip=0x42358086
rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ultimate N WiFi Link 5300'
    class      = network
    bar   [10] = type Memory, range 64, base 0xf8000000, size 8192,
enabled
    cap 01[c8] = powerspec 3  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1)
                 speed 2.5(2.5) ASPM L1(L0s/L1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 00216affff985c6e

Error (same each time except for time):
wlan0: link state changed to UP
iwn0: iwn_intr: fatal firmware error
firmware error log:
  error type      = "SYSASSERT" (0x00000005)
  program counter = 0x00003130
  source line     = 0x00000585
  error data      = 0x0000000100000000
  branch link     = 0x0000312A0000312A
  interrupt link  = 0x0000091600000000
  time            = 1611815765
driver status:
  tx ring  0: qid=0  cur=0   queued=0
  tx ring  1: qid=1  cur=0   queued=0
  tx ring  2: qid=2  cur=0   queued=0
  tx ring  3: qid=3  cur=2   queued=0
  tx ring  4: qid=4  cur=67  queued=0
  tx ring  5: qid=5  cur=0   queued=0
  tx ring  6: qid=6  cur=0   queued=0
  tx ring  7: qid=7  cur=0   queued=0
  tx ring  8: qid=8  cur=0   queued=0
  tx ring  9: qid=9  cur=0   queued=0
  tx ring 10: qid=10 cur=0   queued=0
  tx ring 11: qid=11 cur=0   queued=0
  tx ring 12: qid=12 cur=0   queued=0
  tx ring 13: qid=13 cur=0   queued=0
  tx ring 14: qid=14 cur=0   queued=0
  tx ring 15: qid=15 cur=0   queued=0
  tx ring 16: qid=16 cur=0   queued=0
  tx ring 17: qid=17 cur=0   queued=0
  tx ring 18: qid=18 cur=0   queued=0
  tx ring 19: qid=19 cur=0   queued=0
  rx ring: cur=0
wlan0: link state changed to DOWN

vmstat -i:
...
irq258: iwn0                         973          0
...

Any ideas on what is broken and how to get it to work?

Please Cc me as I am not on this specific list.

Thank you.


Sean
--
s...@freebsd.org



Sean
--
s...@freebsd.org
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to