Merhabalar,
Bir elektrik kesintisi sonrasi FreeBSD 6.0 sistemim
acilirken bekliyor ve asagidaki ciktilari uretiyor.
Bunun sebebi nedir acaba? Ve duzeltmek mumkun mudur?
# dmesg -a
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 6.0-RELEASE-p5 #1: Mon Mar 13 19:31:21 EET
2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BAGKUR
ACPI APIC Table: <INTEL D865GBF >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.80GHz (1795.51-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
real memory = 1064497152 (1015 MB)
avail memory = 1032785920 (984 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D865GBF> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality
1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port
0xec00-0xec07 mem
0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at
device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A>
port 0xc800-0xc81f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B>
port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on
uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C>
port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on
uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D>
port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on
uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1
usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
dc0: <Davicom DM9102A 10/100BaseTX> port 0xb800-0xb8ff
mem 0xff8ffc00-0xff8ffcff irq 18 at device 4.0 on pci1
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on
miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
dc0: Ethernet address: 00:80:ad:05:fd:81
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port
0xbc00-0xbc3f mem 0xff8fe000-0xff8fefff irq 20 at
device 8.0 on pci1
miibus1: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fxp0: Ethernet address: 00:11:11:cf:5d:b9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at
device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f
irq 18 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver
attached)
pci0: <multimedia, audio> at device 31.5 (no driver
attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port
0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port
0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1795508980 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <HL-DT-ST CD-ROM GCR-8522B/1.03> at
ata0-master PIO4
ad4: 238475MB <Seagate ST3250823AS 3.01> at
ata2-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
Loading configuration files.
kernel dumps on /dev/ad4s1b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad4s1b as swap device
Starting file system checks:
/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a: clean, 115349209 free (71657 frags,
14409694 blocks, 0.1% fragmentation)
Setting hostname: fuzuli.bagkur.gov.tr.
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
dc0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
options=8<VLAN_MTU>
inet6 fe80::280:adff:fe05:fd81%dc0 prefixlen
64 tentative scopeid 0x1
inet 192.168.1.2 netmask 0xffffff00 broadcast
192.168.1.255
ether 00:80:ad:05:fd:81
media: Ethernet autoselect (100baseTX
<full-duplex>)
status: active
fxp0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
options=8<VLAN_MTU>
inet6 fe80::211:11ff:fecf:5db9%fxp0 prefixlen
64 tentative scopeid 0x2
inet 10.234.0.250 netmask 0xffffff00 broadcast
10.234.0.255
ether 00:11:11:cf:5d:b9
media: Ethernet autoselect (10baseT/UTP)
status: active
Enabling pflogd
.
May 25 13:46:36 pflogd[238]: [priv]: msg PRIV_OPEN_LOG
received
Enabling pf.
pf enabled
add net default: gateway 192.168.1.1
Additional routing options:
IP gateway=YES
.
Starting devd.
Mounting NFS file systems:
.
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad4s1b...
savecore: reboot after panic: page fault
May 25 13:46:37 fuzuli savecore: reboot after panic:
page fault
savecore: writing core to vmcore.2
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
/usr/local/lib
a.out ldconfig path: /usr/lib/aout
/usr/lib/compat/aout
Starting local daemons:
.
Updating motd
.
Configuring syscons:
keymap
keyrate
font8x16
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
Performing sanity check on apache22 configuration:
Syntax OK
Starting apache22.
Starting squid.
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Saygilarimla..
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------------------------
Cikmak icin, e-mail: [EMAIL PROTECTED]
Liste arsivi: http://lists.enderunix.org
Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php
