Tekrar Merhaba, Simdi de;
"... Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/ad4s1b... savecore: no dumps found ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Starting local daemons: ....." diyor dmesg -a. Nedir bu olay sisteme zarari olan birsey midir? Saygilarimla.. --- Bedreddin ÞAHBAZ <[EMAIL PROTECTED]> wrote: > Merhabalar, > > Bir elektrik kesintisi sonrasi FreeBSD 6.0 sistemim > acilirken bekliyor ve asagidaki ciktilari uretiyor. > Bunun sebebi nedir acaba? Ve duzeltmek mumkun mudur? > > # dmesg -a > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. > All rights reserved. > FreeBSD 6.0-RELEASE-p5 #1: Mon Mar 13 19:31:21 EET > 2006 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BAGKUR > ACPI APIC Table: <INTEL D865GBF > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Celeron(R) CPU 1.80GHz (1795.51-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x4400<CNTX-ID,<b14>> > real memory = 1064497152 (1015 MB) > avail memory = 1032785920 (984 MB) > ioapic0 <Version 2.0> irqs 0-23 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <INTEL D865GBF> on motherboard > acpi0: Power Button (fixed) > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 > pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0 > pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 > pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 > pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 > pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 > pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality > 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port > 0x408-0x40b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on > acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82865G (865G GMCH) SVGA controller> > port > 0xec00-0xec07 mem > 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 > at > device 2.0 on pci0 > agp0: detected 8060k stolen memory > agp0: aperture size is 128M > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> > port 0xc800-0xc81f irq 16 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on > uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, > addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> > port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on > uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, > addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> > port 0xd000-0xd01f irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on > uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, > addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> > port 0xd400-0xd41f irq 16 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on > uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, > addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem > 0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 > usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev > 2.00/1.00, > addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > dc0: <Davicom DM9102A 10/100BaseTX> port > 0xb800-0xb8ff > mem 0xff8ffc00-0xff8ffcff irq 18 at device 4.0 on > pci1 > miibus0: <MII bus> on dc0 > ukphy0: <Generic IEEE 802.3u media interface> on > miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > dc0: Ethernet address: 00:80:ad:05:fd:81 > fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> > port > 0xbc00-0xbc3f mem 0xff8fe000-0xff8fefff irq 20 at > device 8.0 on pci1 > miibus1: <MII bus> on fxp0 > inphy0: <i82562ET 10/100 media interface> on miibus1 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > fxp0: Ethernet address: 00:11:11:cf:5d:b9 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at > device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > atapci1: <Intel ICH5 SATA150 controller> port > 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f > irq 18 at device 31.2 on pci0 > atapci1: failed to enable memory mapping! > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver > attached) > pci0: <multimedia, audio> at device 31.5 (no driver > attached) > acpi_button0: <Sleep Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port > 0x60,0x64 > irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > fdc0: <floppy drive controller> port > 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq > 2 > on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs > 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff > irq 4 flags 0x10 on acpi0 > sio0: type 16550A > ppc0: <Standard parallel printer port> port > 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE > mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs > 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1795508980 Hz quality > 800 > Timecounters tick every 1.000 msec > acd0: CDROM <HL-DT-ST CD-ROM GCR-8522B/1.03> at > ata0-master PIO4 > ad4: 238475MB <Seagate ST3250823AS 3.01> at > ata2-master SATA150 > Trying to mount root from ufs:/dev/ad4s1a > Loading configuration files. > kernel dumps on /dev/ad4s1b > Entropy harvesting: > interrupts > ethernet > point_to_point > kickstart > . > swapon: adding /dev/ad4s1b as swap device > Starting file system checks: > === message truncated === __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com --------------------------------------------------------------------- Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://lists.enderunix.org Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php
