Selamlar, Elektrik kesintisi ile direk bir baglantisi oldugunu dusunmuyorum. Sisteminizde kernel crash yasamissiniz. Eger /etc/rc.conf'unuzda dumpdev direktifi set edilmis durumda ise, FreeBSD, crash'in sonradan debug edilebilmesi icin, crash'in akabinde, RAM icerigini aynen dempdev'e yazar.
Reboot gerceklestikten sonra, FreeBSD multiuser scripteri dumpdev'de herhangi bir crash imaji bulunup bulunmadigini check eder, var ise, bunu savecore programini calistirarak kdb (kernel debugger) programinin anlayabilecegi bir core file olarak filesystem icinde belirtilen bir yere kopyalar. Birinci mailinizdeki dmesg ciktilari, kernel crash'in hemen sonrasinda gerceklestigi icin FreeBSD'nin bir core imaji buldugunu gosteriyor. Asagida da normal bir reboot sonrasi dmesg ciktisi gorunuyor. Normalde, FreeBSD default kurulumda dumpdev set edilmez, fakat, 6.x serisi yogun test surecinde oldugu icin, kullanici geridonuslerini artirmak icin default olarak set etmis olabilirler. Sozun ozu: eger, bu mesajlari gormek istemiyorsaniz, /etc/rc.conf'daki dumpdev'i "NO" yapin. PS: ipucu da sizden olsun ;) Sevgiler, Murat On Thu, May 25, 2006 at 04:25:32AM -0700, Bedreddin ?AHBAZ wrote: > Tekrar Merhaba, > > Simdi de; > > "... > Creating and/or trimming log files: > . > Starting syslogd. > Checking for core dump on /dev/ad4s1b... > savecore: no dumps found > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > /usr/local/lib > a.out ldconfig path: /usr/lib/aout > /usr/lib/compat/aout > Starting local daemons: > ....." > > diyor dmesg -a. Nedir bu olay sisteme zarari olan > birsey midir? > > Saygilarimla.. > > --- Bedreddin ?AHBAZ <[EMAIL PROTECTED]> > wrote: > > > Merhabalar, > > > > Bir elektrik kesintisi sonrasi FreeBSD 6.0 sistemim > > acilirken bekliyor ve asagidaki ciktilari uretiyor. > > Bunun sebebi nedir acaba? Ve duzeltmek mumkun mudur? > > > > # dmesg -a > > Copyright (c) 1992-2005 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > > 1991, 1992, 1993, 1994 > > The Regents of the University of California. > > All rights reserved. > > FreeBSD 6.0-RELEASE-p5 #1: Mon Mar 13 19:31:21 EET > > 2006 > > > > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BAGKUR > > ACPI APIC Table: <INTEL D865GBF > > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Celeron(R) CPU 1.80GHz (1795.51-MHz > > 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x4400<CNTX-ID,<b14>> > > real memory = 1064497152 (1015 MB) > > avail memory = 1032785920 (984 MB) > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > npx0: [FAST] > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: <INTEL D865GBF> on motherboard > > acpi0: Power Button (fixed) > > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > > pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 > > pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0 > > pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 > > pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 > > pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 > > pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 > > pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0 > > Timecounter "ACPI-fast" frequency 3579545 Hz quality > > 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port > > 0x408-0x40b on acpi0 > > cpu0: <ACPI CPU> on acpi0 > > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on > > acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > agp0: <Intel 82865G (865G GMCH) SVGA controller> > > port > > 0xec00-0xec07 mem > > 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 > > at > > device 2.0 on pci0 > > agp0: detected 8060k stolen memory > > agp0: aperture size is 128M > > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> > > port 0xc800-0xc81f irq 16 at device 29.0 on pci0 > > uhci0: [GIANT-LOCKED] > > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on > > uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev > > 1.00/1.00, > > addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> > > port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0 > > uhci1: [GIANT-LOCKED] > > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on > > uhci1 > > usb1: USB revision 1.0 > > uhub1: Intel UHCI root hub, class 9/0, rev > > 1.00/1.00, > > addr 1 > > uhub1: 2 ports with 2 removable, self powered > > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> > > port 0xd000-0xd01f irq 18 at device 29.2 on pci0 > > uhci2: [GIANT-LOCKED] > > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on > > uhci2 > > usb2: USB revision 1.0 > > uhub2: Intel UHCI root hub, class 9/0, rev > > 1.00/1.00, > > addr 1 > > uhub2: 2 ports with 2 removable, self powered > > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> > > port 0xd400-0xd41f irq 16 at device 29.3 on pci0 > > uhci3: [GIANT-LOCKED] > > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on > > uhci3 > > usb3: USB revision 1.0 > > uhub3: Intel UHCI root hub, class 9/0, rev > > 1.00/1.00, > > addr 1 > > uhub3: 2 ports with 2 removable, self powered > > ehci0: <EHCI (generic) USB 2.0 controller> mem > > 0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0 > > ehci0: [GIANT-LOCKED] > > usb4: EHCI version 1.0 > > usb4: companion controllers, 2 ports each: usb0 usb1 > > usb2 usb3 > > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > > usb4: USB revision 2.0 > > uhub4: Intel EHCI root hub, class 9/0, rev > > 2.00/1.00, > > addr 1 > > uhub4: 8 ports with 8 removable, self powered > > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pci1: <ACPI PCI bus> on pcib1 > > dc0: <Davicom DM9102A 10/100BaseTX> port > > 0xb800-0xb8ff > > mem 0xff8ffc00-0xff8ffcff irq 18 at device 4.0 on > > pci1 > > miibus0: <MII bus> on dc0 > > ukphy0: <Generic IEEE 802.3u media interface> on > > miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, > > 100baseTX-FDX, auto > > dc0: Ethernet address: 00:80:ad:05:fd:81 > > fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> > > port > > 0xbc00-0xbc3f mem 0xff8fe000-0xff8fefff irq 20 at > > device 8.0 on pci1 > > miibus1: <MII bus> on fxp0 > > inphy0: <i82562ET 10/100 media interface> on miibus1 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, > > 100baseTX-FDX, auto > > fxp0: Ethernet address: 00:11:11:cf:5d:b9 > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel ICH5 UDMA100 controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at > > device 31.1 on pci0 > > ata0: <ATA channel 0> on atapci0 > > ata1: <ATA channel 1> on atapci0 > > atapci1: <Intel ICH5 SATA150 controller> port > > > 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f > > irq 18 at device 31.2 on pci0 > > atapci1: failed to enable memory mapping! > > ata2: <ATA channel 0> on atapci1 > > ata3: <ATA channel 1> on atapci1 > > pci0: <serial bus, SMBus> at device 31.3 (no driver > > attached) > > pci0: <multimedia, audio> at device 31.5 (no driver > > attached) > > acpi_button0: <Sleep Button> on acpi0 > > atkbdc0: <Keyboard controller (i8042)> port > > 0x60,0x64 > > irq 1 on acpi0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > fdc0: <floppy drive controller> port > > 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq > > 2 > > on acpi0 > > fdc0: [FAST] > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > sio0: configured irq 4 not in bitmap of probed irqs > > 0 > > sio0: port may not be enabled > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff > > irq 4 flags 0x10 on acpi0 > > sio0: type 16550A > > ppc0: <Standard parallel printer port> port > > 0x378-0x37f irq 7 on acpi0 > > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE > > mode > > ppbus0: <Parallel port bus> on ppc0 > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > pmtimer0 on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio1: configured irq 3 not in bitmap of probed irqs > > 0 > > sio1: port may not be enabled > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > > 0xa0000-0xbffff on isa0 > > Timecounter "TSC" frequency 1795508980 Hz quality > > 800 > > Timecounters tick every 1.000 msec > > acd0: CDROM <HL-DT-ST CD-ROM GCR-8522B/1.03> at > > ata0-master PIO4 > > ad4: 238475MB <Seagate ST3250823AS 3.01> at > > ata2-master SATA150 > > Trying to mount root from ufs:/dev/ad4s1a > > Loading configuration files. > > kernel dumps on /dev/ad4s1b > > Entropy harvesting: > > interrupts > > ethernet > > point_to_point > > kickstart > > . > > swapon: adding /dev/ad4s1b as swap device > > Starting file system checks: > > > === message truncated === > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > --------------------------------------------------------------------- > Cikmak icin, e-mail: [EMAIL PROTECTED] > Liste arsivi: http://lists.enderunix.org > Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php > > -- AcikAcademy published Turkish translation of Network Security Hacks by Oreilly Acik Akademi'nin yeni kitabini duydunuz mu? http://www.acikakademi.com/catalog/nethacks/ --------------------------------------------------------------------- Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://lists.enderunix.org Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php
